StarTech USB 3.0 Dual Hard Drive Dock with Fast Charge USB Hub (Black & Silver)

BH #STSDK2U33HFB • MFR #SDOCK2U33HFB
Print
StarTech USB 3.0 Dual Hard Drive Dock with Fast Charge USB Hub (Black & Silver)
Key Features
  • SATA III (6 Gb/s) Interface
  • USB 3.0 (5 Gb/s) Interface
  • SATA 2.5"/3.5" Drive Support
  • UASP Support
The black with silver trim USB 3.0 Dual Hard Drive Dock with Fast Charge USB Hub from StarTech enables two SATA 2.5"/3.5" Hard Disk Drives (HDD) or Solid State Drives (SSD) to be connected simultaneously to a computer through USB, while controlling the power status (on/off) of each individual drive independently from each other. The enclosure supports UASP and delivers optimal performance with a USB 3.0 connection, and is also backwards compatible with USB 2.0/1.1 host connections. It features a built-in 2-port USB 3.0 hub that enables you to connect additional USB 3.0 devices to your computer, through the same USB connection. One of the ports on the hub also has Fast Charging capabilities that charge iPads and other mobile devices, as effectively as through a wall plug.

With support for UASP, the dock performs up to 70% faster than conventional USB 3.0, when paired with a UASP-enabled host controller to utilize the full potential of your SATA III hard drives. In testing* UASP performs with a 70% faster read speed and 40% faster write speed over traditional USB 3.0 at peak performance. At the same peak in testing* UASP also shows an 80% reduction in required processor resources. UASP is supported in Windows 8, Mac OS X (10.8 or above), and Linux.

With support for SATA I/II/III, large capacity drives (tested up to 4TB), and 2.5"/3.5" hard drives, this docking station is compatible with virtually any SATA hard drive, and increases the storage/backup capabilities of your computer. In addition, its configurable power management reduces energy consumption, and extends the life of your drives by avoiding unnecessary access. The docking station features a built-in 80mm cooling fan that helps to increase reliability and lifespan of HDDs, by keeping the drives cooler. Its variable fan speed control allows for adjustments for any type of HDD and can be used to balance cooling with noise.

You can extend the value of this docking station further with the addition of a SATA to IDE Hard Drive Adapter (SAT2IDEADP), allowing easy insertion of any 2.5"/3.5" IDE hard drive into a SATA hard drive dock. To ensure compatibility with your computer system, the docking station supports all of the leading operating systems, including Microsoft Windows (8/7/Vista/XP/Server 2008/Server 2003), Apple OS X (10.9/10.8/10.7/10.6), Linux, and Google Chrome OS.
More Details
No Longer Available
No Store Display
Ask an Expert
800-952-1815

StarTech SDOCK2U33HFB Overview

The black with silver trim USB 3.0 Dual Hard Drive Dock with Fast Charge USB Hub from StarTech enables two SATA 2.5"/3.5" Hard Disk Drives (HDD) or Solid State Drives (SSD) to be connected simultaneously to a computer through USB, while controlling the power status (on/off) of each individual drive independently from each other. The enclosure supports UASP and delivers optimal performance with a USB 3.0 connection, and is also backwards compatible with USB 2.0/1.1 host connections. It features a built-in 2-port USB 3.0 hub that enables you to connect additional USB 3.0 devices to your computer, through the same USB connection. One of the ports on the hub also has Fast Charging capabilities that charge iPads and other mobile devices, as effectively as through a wall plug.

With support for UASP, the dock performs up to 70% faster than conventional USB 3.0, when paired with a UASP-enabled host controller to utilize the full potential of your SATA III hard drives. In testing* UASP performs with a 70% faster read speed and 40% faster write speed over traditional USB 3.0 at peak performance. At the same peak in testing* UASP also shows an 80% reduction in required processor resources. UASP is supported in Windows 8, Mac OS X (10.8 or above), and Linux.

With support for SATA I/II/III, large capacity drives (tested up to 4TB), and 2.5"/3.5" hard drives, this docking station is compatible with virtually any SATA hard drive, and increases the storage/backup capabilities of your computer. In addition, its configurable power management reduces energy consumption, and extends the life of your drives by avoiding unnecessary access. The docking station features a built-in 80mm cooling fan that helps to increase reliability and lifespan of HDDs, by keeping the drives cooler. Its variable fan speed control allows for adjustments for any type of HDD and can be used to balance cooling with noise.

You can extend the value of this docking station further with the addition of a SATA to IDE Hard Drive Adapter (SAT2IDEADP), allowing easy insertion of any 2.5"/3.5" IDE hard drive into a SATA hard drive dock. To ensure compatibility with your computer system, the docking station supports all of the leading operating systems, including Microsoft Windows (8/7/Vista/XP/Server 2008/Server 2003), Apple OS X (10.9/10.8/10.7/10.6), Linux, and Google Chrome OS.

Charge your iPad and other mobile device faster than standard USB 3.0, with Fast Charge port specially designed for compatibility with a wide range of tablets and smartphones
Extends HDD life by keeping drives cool, with built-in variable speed cooling fan
Hassle-free access to data on up to two separate hard drives simultaneously, with dual bay hot-swappable top slot-loading dock design that supports both 2.5" and 3.5" HDDs/SSDs
Built-in USB 3.0 hub with Fast Charging port
80mm cooling fan with variable speed control (including off)
Configurable power management
SuperSpeed USB 3.0 compliant host interface, with up to 5 Gb/s of data bandwidth
Compatible with SATA revision I/II/III (1.5/3.0/6.0 Gb/s) drives
Plug and play and hot-swappable
System administrators who need quick access to drives for imaging
Test or benchmark different hard drives and swap between them
Backup data quickly to an external data archive
Easily copy data from one external drive to another, in a single external dock through one USB connection
Allows quick access to drives to recover/retrieve data

StarTech SDOCK2U33HFB Specs

Hardware
Interface
USB 3.0
Number of Drives
2
Drive Size
2.5"/3.5"
Drive Type
SATA
Fans
1 x 3.1" (80.0 mm)
Filter Type
Mesh
Chipset ID
VIA812+ASM1053E
Connectors
Drive Connectors
2 x SATA data and power combo (7+15-pin) female
Host Connectors
1 x USB 3.0 B (9-pin, SuperSpeed) female
Other Interfaces
1 x USB 3.0 A (5 V, 2 A, 9-pin, SuperSpeed) female
1 x USB 3.0 A (9-pin, SuperSpeed) female
Performance
Maximum Drive Capacity
Tested with up to 4 TB 5400 rpm 3.5" hard drives and 1 TB 5400 rpm 2.5" hard drives
Type and Rate
SATA III (6 Gb/s)
USB 3.0 (5 Gb/s)
UASP Support
Yes
Software
OS Compatibility
Windows 8/8.1 (32/64-bit), 7 (32/64-bit), Server 2008 (32/64-bit), Vista (32/64-bit), Server 2003 (32/64-bit), XP (32/64-bit), 2000
Apple Mavericks (10.9), OS X Mountain Lion (10.8), Lion (10.7), Snow Leopard (10.6)
Linux
Google Chrome OS
Microsoft WHQL Certified
Yes
Indicators
LED Indicators
1 x Power/Activity (drive 1)
1 x Power/Activity (drive 2)
Power
Input Voltage
100 to 240 VAC
Input Current
1.5 A
Output Voltage
12 VDC
Output Current
6 A
Center Tip Polarity
Positive
Plug Type
M
Environmental
Operating Temperature
41 to 95°F (5 to 35°C)
Storage Temperature
-4 to +122°F (-20 to +50°C)
Relative Humidity
20 to 80%
Certification and Compliance
Certifications
CE, FCC
Compliance
RoHS
Physical Characteristics
Dimensions
7.3 x 4.8 x 5.7" (18.5 x 12.2 x 14.5 cm)
Weight
29.2 oz (826.0 g)
Packaging Info
Package Weight
3.35 lb
Box Dimensions (LxWxH)
7.8 x 6.4 x 5.4"

StarTech SDOCK2U33HFB Reviews

See any errors on this page?
Whatever You Need, We've Got It