Video Chat with a Pro Video Expert - Live

E-Image GH10L 100mm Pro Fluid Video Head

BH #EIGH10L • MFR #GH10L
Print
E-Image GH10L 100mm Pro Fluid Video Head
Key Features
  • 22 lb Payload
  • 100mm Half Ball
  • Stepped Counterbalance (1-7)
  • 0-3 Grades of Pan & Tilt Drag
The GH10L Fluid Head from E-Image offers 1-7 steps of counterbalance and 0-3 grades of pan and tilt drag, allowing the flexibility to fine-tune different payload configurations up to 22 lb. It includes a sliding camera plate and telescoping pan arm that can be mounted on rosette adapters on either the left or right side.
More Details
In Stock
No Store Display
Free Expedited Shipping
Protect Your Gear
Add a protection plan from $79.99
Ask an Expert
800-606-6969

E-Image GH Series Video Head Overview

The GH10L Fluid Head from E-Image offers 1-7 steps of counterbalance and 0-3 grades of pan and tilt drag, allowing the flexibility to fine-tune different payload configurations up to 22 lb. It includes a sliding camera plate and telescoping pan arm that can be mounted on rosette adapters on either the left or right side.

The pan range is a full 360°, tilt range is -60° to 90°, and separate thumb locks are available for pan and tilt. An illuminated bubble level will help you set up your shots, and a 1/4"-20 mounting thread is available for attaching an articulating arm with a monitor or other device.

Key Features
  • 1-7 steps of counterbalance
  • 0-3 grades of pan and tilt drag
  • 22 lb payload
  • Sliding camera plate and telescoping pan arm included
  • Two pan arms supported via rosette adapters
  • 360° pan range
  • -60° to 90° tilt range
  • Separate pan and tilt thumb locks
  • Illuminated bubble
  • 1/4"-20 mounting thread for accessories
UPC: 847983010790

E-Image GH Series Video Head Specs

Key Specs
Camera Mounting
1/4"-20 & 3/8"-16 Screws with Locating Pin (Quick Release w/ Sliding Balance Plate)
Head Type
Fluid Head
Drag Control
Yes
Load Capacity
22 lb / 10 kg
Weight
5 lb / 2.3 kg
Head
Camera Mounting
1/4"-20 & 3/8"-16 Screws with Locating Pin (Quick Release w/ Sliding Balance Plate)
Head Type
Fluid Head
Base Mount
100 mm Half Ball
Counter Balance
Incremental 7-Step
Pan & Tilt
Drag Control
Yes
Independent Pan Lock
Yes
Independent Tilt Lock
Yes
Vertical Tilt
+90° to -60°
Lateral Tilt
No
General
Load Capacity
22 lb / 10 kg
Accessory Mounting
1x 1/4"-20 Female Thread
Bubble Level
Yes (Illuminated)
Weight
5 lb / 2.3 kg
Packaging Info
Package Weight
6.85 lb
Box Dimensions (LxWxH)
14.173 x 8.425 x 4.803"

E-Image GH Series Video Head Reviews

Broke the second time I used it

By Dan
Rated 1 out of 5
Date: 2026-02-04

Can't use the full tilt resistance setting range, the dial simply won't turn all the way, it broke the second time I used it. I emailed the E-Image support people, they do not have a warranty support repair facility in America. They told me in broken english to email a video of the problem. No, I'm not mailing this unit to China for warranty repair.

Revisit Review

By Sang
Rated 5 out of 5
Date: 2022-04-04

Bought this about a year ago. I use medium size rigs on it. built up c70 with Ninja V and follow focus and other not so heavy things. I'm guessing about 6lbs. This works like a champ! Its smooth and the drag controls are spot on. They're tuned to each other, meaning if you put the tilt on 2 and pan on 2, you can make a nice circle movement and not notice any difference in the two resistance. Not to mention completely repeatable, unlike those friction clutch systems. The counter balance system is great too. But if you use just a dslr or mirrorless by itself, it may be too light for the counter balance, even at the 1 setting. Some people mentions that there is no in between increments (there are only 4 settings), but I had yet to have a rig not balance on those 4 settings. The locks are great and nothing moves once locked. but I don't like the placement of the pan lock. Its too tucked in. You have to fumble around like a teenager trying to... never mind. I like the way the handle can telescope out. The longer handle will give you less shake, if using a very long lens or you had too much coffee. The ball lock is good too. Never had it slip on me yet. Its not the most comfortable shaped knob but since you don't have to twist it that hard lock or unlock, its not too bad. I wish the head was lighter, but its a video head, I guess you really can't skimp on weight. This is a couple of notches higher than your budget friction fluid heads for sure. Love it!

See any errors on this page?

Can you use Arca swiss plates?? really right ...

Can you use Arca swiss plates?? really right stuff foot plates and Kirk plates ?
Asked by: John
The E-Image GH10L 100mm Pro Fluid Video Head takes only an E-Image GP1 Quick Release Plate (SKU: EIGP1) https://www.bhphotovideo.com/c/product/1046984-REG/e_image_gp1_camera_plate_for_gh03_06_08_10.html/qa An Arca swiss-style plate could be used with an adapter such as a Really Right Stuff B2-LLR-II Lever-Release Clamp (80mm) (SKU: RERELESECLMP) https://www.bhphotovideo.com/c/product/1301154-REG/really_right_stuff_b2_llr_ii_quick_release_c_lever_release_style_quick_release_clamp.html
Answered by: Eric
Date published: 2020-06-26

According to specs, this fluid head should be ...

According to specs, this fluid head should be operational at -40 degrees. Is this true? Has anyone tried it in very cold temperatures?
Asked by: Anna
The manufacturer's specs are based on workbench tests that are rigidly adhered to and while we do not have first-hand access to those temperature conditions, we have heard of instances where this fluid head did operate successfully at very low, mid-winter New York temperatures.
Answered by: Bruno
Date published: 2020-08-14

Differences between GH03 and GH06 besides obvious ...

Differences between GH03 and GH06 besides obvious ball vs flat base?
Asked by: Jonathan
The GH03 has a 13lb / 5kg load capacity while the GH06 has a 13lb / 6kg load capacity. The counter balance for the GH03 is fixed while the GH06 has an incremental 5-step plus 0 counter balance.
Answered by: Nick Y
Date published: 2020-12-28

I would like to use this for a Nikon p900 bridge ...

I would like to use this for a Nikon p900 bridge camera . How would the counterbalance work with a zoom lens?
Asked by: Susan
Although the Nikon p900 camera would mount and be supported by the GH06 Fluid Head, it is intended for use with larger cameras. A Gitzo 2-Way Fluid Head would be better suited for the camera’s size and can accommodate large range zoom lenses. https://www.bhphotovideo.com/c/product/1436575-REG/gitzo_ghf2w_2_way_fluid_head.html/qa
Answered by: maria
Date published: 2020-05-27

Can this head be used with the Feisol Tournament ...

Can this head be used with the Feisol Tournament CT-3442 Tripod or the Gitzo Lightweight Traveler Series ?
Asked by: Kevin
The Feisol CT-3442 and the Gitzo Traveler tripods do not take bowl-based fluid heads. You'll need to get a flat-based fluid head.
Answered by: Jeremy
Date published: 2023-01-31

question

What is the weight of this head?
Asked by: JM
The head weighs 1.2kg / 2.6lbs
Answered by: Edwin
Date published: 2024-03-26

Will this video head receive a stand Manfrotto ...

Will this video head receive a stand Manfrotto plate such as Manfrotto 501PL?
Asked by: Craig
Unfortunately it will not. This head is not compatible with 501PL style plates.
Answered by: Joe P
Date published: 2020-11-02

question

is there any design difference between the flat and ball version of this head? (other than the ball of course)
Asked by: Anonymous
It is the same from the base up.
Answered by: Dennis A L.
Date published: 2019-06-04
  • y_2026, m_6, d_4, h_10CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.46
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_30
  • loc_en_US, sid_1086393, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_bhphotovideo
Whatever You Need, We've Got It