Acratech Quick Release Plate for Nikon FTZ Adapter

If the F-mount lens you own is a telephoto lens and designed for use with the FTZ lens adapter, then there is a possibility the Acratech Quick Release Plate for Nikon FTZ Adapter may work for your usage needs on a gimbal. However, this cannot be guaranteed as due to the close proximity of the FTZ lens mount adapter to the camera body, there may not be enough clearance from the between the camera and the gimbal arm. The foot or tripod collar on a telephoto lens is seated further up on the lens to center the balance of the camera/lens setup, and is usually narrower than where the FTZ mount sits on the camera. As such, you may have to try the setup on your specific camera/lens/FTZ mount/gimbal setup for compatibility testing.

We made the FTZ adaptor tall enough to clear when our camera plates were on the camera. I cannot guarantee that the bracket you are using will clear, but it should. Unless they made the bracket with a thicker profile or did something unusual to change the bottom. If they did...well then they did not have the adaptor at the same time that they made their bracket.

The Acratech Quick Release Plate for Nikon FTZ Adapter is approxemelty 2.3 x 2.2 x 1.1 inches. Acratech does not list the 1/4 inch thread length. But it is made for the FTZ lens adapter.