Video Chat with a Pro Audio Expert - Live

Schoeps Colette CMC 6 Microphone Amp and MK 4V Side-Address Cardioid Condenser Capsule (Matched Pair)

BH #SCSTRSETMK4V • MFR #STEREO SET MK 4V
Print
Schoeps Colette CMC 6 Microphone Amp and MK 4V Side-Address Cardioid Condenser Capsule (Matched Pair)
Key Features
  • Matched Pair of Condenser Microphones
  • MK 4V Side-Address Cardioid Capsule
  • CMC 6 Microphone Amplifier
  • Transformerless Class-A Output Stage
Presented as a matched pair in a wooden case, the matte gray Schoeps Colette CMC 6 Microphone Amp and MK 4V Side-Address Cardioid Condenser Capsule is a Colette Series modular cardioid condenser microphone bundle designed for demanding stereo recording applications. The MK 4V capsule has its main axis along its side and offers a brighter tone than the MK 4 end-address capsule.
More Details

Schoeps CMC 6 MK4 Overview

Presented as a matched pair in a wooden case, the matte gray Schoeps Colette CMC 6 Microphone Amp and MK 4V Side-Address Cardioid Condenser Capsule is a Colette Series modular cardioid condenser microphone bundle designed for demanding stereo recording applications. The MK 4V capsule has its main axis along its side and offers a brighter tone than the MK 4 end-address capsule.

Ideal for capturing dialog, foley, and instruments in film, television, and music production, this mic pair provides frequency-independent directionality and transparent, low-distortion sound pickup. The mics can be powered via 12 or 48 VDC phantom power without compromising reliability or sonic performance. Also included are two stand clamps and two foam windscreens, which reduce wind noise and plosives.

Colette Stereo Set
  • Two CMC 6 microphone amplifiers
  • Matched pair of MK 4V side-address cardioid condenser capsules
  • Certificate of matching
  • Two stand clamps
  • Two foam windscreens
  • Schoeps touch fastener cable strap
  • Wooden case
MK 4V Condenser Capsules
  • Cardioid polar pattern
  • Directionality is well maintained even at higher frequencies
  • Side-address design
  • Acoustically transparent housing
  • Mild high-frequency elevation around 10 kHz
  • Brighter than the MK 4
CMC 6 Microphone Amplifiers
  • Flat frequency response
  • Very-low harmonic distortion and noise
  • Works with 12 or 48 VDC phantom power
  • Balanced, low-impedance output
  • High suppression of interference on the microphone cable
  • Excellent protection against high-frequency radio interference via integrated Schoeps RFI Shield
  • Frequency-independent impedance
  • Signal transmission possible over very-long cable runs (up to 1300')
  • Reliable operation even with weak phantom power
  • Symmetrical, transformer- and capacitor-free output stage with a Class-A amplifier
  • Signal above 20 kHz is attenuated for protection against interference in the ultrasonic range (e.g. through the ultrasonic autofocus of a film camera)
  • 12 dB/octave low-cut filter at 20 Hz

Schoeps CMC 6 MK4 Specs

Key Specs
Microphone Type
Small Diaphragm
Polar Pattern
Cardioid
Element Type
Condenser
Controls
Low Cut/HPF
Frequency Response
40 Hz to 19 kHz
Maximum SPL
131 dB
Analog Output
1x XLR 3-Pin Male
Power Sources
Phantom Power
Microphone
Microphone Type
Small Diaphragm
Polar Pattern
Cardioid
Element Type
Condenser
Sound Field
Mono
Orientation
Side Address
Controls
Low Cut/HPF
Pad
No
Filter & EQ
Low-Cut Filter: 20 Hz, 12 dB/Octave
Circuitry
Solid-State
Performance
Frequency Response
40 Hz to 19 kHz
Maximum SPL
131 dB
Off-Axis Rejection
>2 dB at 60°
10 dB at 120°
30 dB at 180°
Sensitivity
-36.5 dBV/Pa
Equivalent Noise Level
13 dB (A-Weighted)
23 dB (CCIR)
Connectivity
Analog Output Connector
1x XLR 3-Pin Male
Power
Power Sources
Phantom Power
Operating Voltage
20 to 52 V (Phantom Power)
10 to 13 V (Phantom Power)
Physical
Color
Gray
Dimensions
ø: 0.8 x L: 5.9" / 20 x L: 150 mm
Weight
2.8 oz / 78 g (Each)
Packaging Info
Package Weight
1.7 lb
Box Dimensions (LxWxH)
7.8 x 7.6 x 2.4"

Schoeps CMC 6 MK4 Reviews

See any errors on this page?
Whatever You Need, We've Got It