Video Chat with a Pro Video Expert - Live

Anton/Bauer Titon Base Kit with P-Tap Charger

BH #ANTBKBPTC • MFR #8275-0149
Print
Anton/Bauer Titon Base Kit with P-Tap Charger
Key Features
  • Power Various Cameras and Accessories
  • Slim 68Wh Titon Base Battery
  • P-Tap and USB-A Power Outputs
  • International 14 VDC, 2A P-Tap Charger
Power your camera and various accessories with this Titon Base Kit from Anton/Bauer. The base kit includes a 68Wh Titon Base battery and a P-Tap charger.
More Details
See any errors on this page?

Is there any other compatible quick-release plate ...

Is there any other compatible quick-release plate that has both the 1/4" and 3/8" screws for Komodo to prevent twisting?
Asked by: Steve K
Unfortunately there is no other quick-release plate that has both the 1/4" and 3/8" screws for the RED Komodo that is compatible with the Anton Bauer Titon Base Battery.
Answered by: Nick Y
Date published: 2021-10-10

For BMPCC 6K Pro, is it safe to leave an internal ...

For BMPCC 6K Pro, is it safe to leave an internal battery in the camera while plugged into d tap via 2 pin? Also, if the Titon dies will the camera automatically switch over to the internal battery without interruption?
Asked by: Kyle
If the Titon battery dies, the camera will automatically switch over to the internal battery without interruption.
Answered by: Nick Y
Date published: 2024-06-03

"Will this work for the red Komodo?" Is it just a ...

"Will this work for the red Komodo?" Is it just a cable/connection issue or a voltage/amp issue?
Asked by: Brandon
Yes, the Anton Bauer Titon Base Kit Battery will work with the RED Komodo. The cable/connection and voltage/amp requirements need to be met. Since the output voltage is 14.4V, all you need is a D-tap to 2-pin LEMO cable.
Answered by: Nick Y
Date published: 2021-10-06

Which version will work with the new Canon R5C?

Which version will work with the new Canon R5C?
Asked by: Raymond
Yes. Please review the following to extend the battery life on your canon R5 unit. Anton Bauer Titon Base Kit for Canon LP-E6-Powered Cameras BH #ANTBKCE6C • MFR #8275-0138 https://bhpho.to/3tU76f3
Answered by: hectorm
Date published: 2022-01-24

Can you run two of these in parallel ie very long ...

Can you run two of these in parallel ie very long timelapse?
Asked by: Patrick
No, you are not able to run two of the Anton/Bauer 68Wh Titon Base Batteries in parallel.
Answered by: Elliot
Date published: 2024-05-24

Can this also be used while charging on wall ...

Can this also be used while charging on wall power, i.e. using it like a Canon DR-E6C DC Coupler?
Asked by: Bryce
Unfortunately, it is not possible to charge, as well as power a camera at the same time with the Anton/Bauer Titon Base Kit for Canon LP-E6-Powered Cameras. The kit will not work as a dummy battery coupler when connected to wall power.
Answered by: Chris H
Date published: 2023-09-29

how many hours can this give?

how many hours can this give?
Asked by: JAIRO
Runtime for the Pocket Cinema 4K is 3.1 hours and for the Pocket Cinema 6K 2.7 hours, with no additional accessories being powered by the battery.
Answered by: Andrew Hutton
Date published: 2023-12-18

Which version will work with a Canon R5?

Which version will work with a Canon R5?
Asked by: JEREMY PETER
It works with the R5. You will need a dummy battery cable for the Canon battery. Tip: make sure the R5 battery door is closed! There is a small flap on the R5 that allows you to pull the dummy battery cable through, and to close the battery compartment door on the R5. The R5 will NOT turn on if the battery compartment door is open or if its removed with the dummy battery inside.
Answered by: David
Date published: 2022-02-25
  • y_2026, m_8, d_14, h_4CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.48
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_42
  • loc_en_US, sid_1596800, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_bhphotovideo
Whatever You Need, We've Got It