At the heart of FREEFLY's MōVI Pro system is the gimbal unit. Using the "Toad in the Hole" quick release system, this gimbal can be attached to handles, aerial platforms, or terrestrial vehicles for stable, professional shots. The MōVI Pro motorized gimbal stabilizer steadies cameras weighing up to 15 lb, rendering it compatible with mirrorless all the way up to smaller cinema cameras. With separately available battery options, the camera and essential accessories can be powered without adding any bulk to the MōVI Pro via its D-Tap output port.
Power Surge Firmware Update
The newest firmware update gives the MoVI Pro motor a power boost to increase camera control. Hold your top speed for longer and recover faster thanks to Maniac Mode 2.0, which increases time at peak torque for all three motors. The motor temperature estimator has been reengineered to sustain maximum torque for longer while protecting the motors. On-screen display control can be facilitated via MoVI Controller when filming with the FREEFLY Ember, Panasonic BGH1, and Panasonic BS1H with the Entire Air Commander.
Versatile "Toad in the Hole" Design
The MōVI Pro is capable of turning 180° to quickly transition from upright to inverted mounting modes and transition from handheld to TERO-mounted configurations. Handle configuration options include the RING Pro, skate, and classic modes. Mount the gimbal onto a drone and use the dual GPS units on the top and bottom for solid signal in both Sky or GroundView.
3-Axis Lens Control
Built into the camera stage is a fully integrated lens control system. Use the internal, long-range 2.4 GHz frequency hopping signal to connect to the separately available MIMIC, Mōvi controller, or a combination of the two.
RED RCP2 Integration
Access RED camera controls like focus, iris, ISO, and start/stop thanks to the integrated RCP2 control. Use the Mōvi or MIMIC controller to adjust those settings from hundreds of feet away.
Built-In Screen
- Gives the user quick access to important information
- Tune/adjust parameters on the fly without a phone or computer
- Enter majestic angle or time-lapse mode
- Pan, tilt, roll balancing, and stiffness
- Full stiffness and filter auto-tune in approximately 10 seconds
Improved Stability, Increased Torque
High-quality sensors with precise calibration allow for smooth performance even during the most demanding shots with a 60 dB at 1 Hz disturbance rejection. The Pro features twice the torque of previous gimbal motors thanks to its direct-drive brushless motors.
Power Capabilities and Compatibility
- The dual battery plates are hot-swappable for easy replacement while shooting in the field. They are compatible with separately available Mōvi Pro, SL4-Ground, and TB50/55 batteries.
- Three D-Tap outputs and one USB output on the gimbal provide the camera and any attached accessories with power.
App Control
Tune and customize your gimbal in real time using the iOS and Android compatible Mōvi Pro App. Configure your time-lapse settings and monitor battery status all from your phone, which is especially useful when your gimbal is mounted on the TERO vehicle or a high-powered drone.
Compatibility
For a full list of compatible cameras, please see the most current compatibility information on the FREEFLY website.