Mix your band while powering your favorite PA speakers with the Behringer Europower PMP4000, a 16-channel powered PA mixer with an integrated 1600W amplifier, 7-band graphic EQ with FBQ technology, and a digital effect engine, well suited for touring bands, clubs, bars, and more. The Class-D amplifier delivers up to 800W per channel at 4 ohms to drive a pair of PA loudspeakers.
The mixer features XLR and 1/4" inputs on mono channels and 1/4" inputs on stereo channels. Inputs 9/10 and 11/12 also feature stereo RCA inputs. Channels 1 to 8 include 1/4" inserts for adding your favorite outboard effects. The mixer includes two main outputs, two monitor sends, and one effect send, which connects to the onboard DSP with over 100 presets. Each channel includes a 3-band EQ with sweepable mids to dial in your best sound. A power cord is included.
At a Glance
- Ultracompact 2 x 800W stereo powered mixer (1600W bridged mode)
- Remarkable Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight
- Ultracompact design at nearly half the weight of conventional powered mixers
- 16-channel mixer section features 8 mono and 4 stereo channels plus separate CD/Tape input/output
- Studio-grade 24-bit stereo FX processor with 100 presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects
- Revolutionary FBQ Feedback Detection system instantly reveals critical frequencies for easy feedback removal
- 8 high-quality XENYX mic preamps with switchable +48 V phantom power for condenser microphones
- Effective, musical 3-band EQ, switchable low-cut filter, and clip LEDs on all mono channels
- Stereo 7-band graphic EQ allows precise frequency correction of monitor or main outputs
- Voice Canceler function removes singer's voice from recordings for karaoke applications
- Selectable stereo (main L/R), double mono (main/monitor), or bridged mono amplifier operation mode
- XPQ 3D stereo surround effect adds vitality and an enhanced stereo image
- Adjustable stereo CD/tape input for connecting external signal sources
- Multifunctional stereo preamp outputs for added flexibility
- Internal switch-mode power supply, noise-free audio, superior transient response, and very low power consumption
All-In-One Solution
The powerful PMP4000 gives you the choice of 2 x 800W stereo or 2 x 800W dual mono mode (mains-powered output, 1 Monitor sends signals through the second powered input) or 1600W bridged mono sound. Whether the center of attention happens to be a folk trio, a speech, or a synth-rock band with mind-boggling stereo patches, the PMP4000 can accommodate it. This sonic versatility also makes it an excellent choice for houses of worship where vocals and stereo recordings often share face time.
Remarkable Mic Preamps
The PMP4000 features high headroom XENYX mic preamps, which have been praised by audio engineers all over the world. These state-of-the-art mic pres represent a major step in the evolution of audio technology, and they can easily hold their own, even when compared to the most expensive standalone mic preamps. XENYX preamps offer a staggering 130 dB of dynamic range, with a bandwidth that extends from below 10 Hz to well above 200 kHz.
Digital Multi-FX Processor
Equipped with two studio-grade 24-bit Multi-FX processors, the PMP4000 mixer gives you 100 mind-blowing digital effect presets such as delay, chorus, reverb, and much more. Apply them to any channel, or to the monitors and main output. Of course, if you have treasured outboard gear to which you've grown attached, these mixers can integrate them into the mix while bypassing the built-in FX processor.
FBQ Feedback Elimination
Utilizing an ultrafast feedback detection system, this ingenious circuitry helps you recognize and tame feedback frequencies immediately. When feedback is sensed in a specific frequency range, the LED on the associated EQ fader illuminates, showing you at a glance which fader to lower to overcome the feedback.
Special Features
The PMP4000 comes equipped with Behringer's Voice Canceler technology, which eliminates the vocals from prerecorded music, for instant karaoke applications, and the proprietary XPQ 3D stereo surround effect lets you create a much broader and enhanced stereo image.
Get Connected
Use the CD/tape RCA inputs to input external stereo signals. Conversely, the CD/tape RCA outputs send line-level signals from the mixer to a recording device. The left and right output 1/4" connectors can be used for a variety of purposes, including connecting to additional power amps. Connect your monitor power amps or active monitor speakers to the Monitor Sound output. Powered outputs on these mixers are available in the professional, twist-lock Speakon-compatible variety.
UPC: 713757154611