Video Chat with a Pro Video Expert - Live

Hollyland Pyro 5 Wireless Transceiver Monitor

BH #HOPYRO5 • MFR #PYRO 5
Print
Hollyland Pyro 5 Wireless Transceiver Monitor
90-Second Intro
Key Features
  • Monitor Wireless Video up to 1312' Away
  • 5.5" Touchscreen 1920 x 1080 Display
  • Transmitter & Receiver Mode Switching
  • One Transmitter Can Send to 4 Receivers
Transmit, receive, and monitor high-quality wireless video transmissions using the versatile Pyro 5 Wireless Transceiver Monitor from Hollyland. The Pyro 5 takes the previous M1 transceiver/monitor and makes everything bigger and better with a bright 5.5" touchscreen display, L-series battery plate, wireless transmission up to 1312' away, SD card video recording, HDMI/SDI input/output, RTMP streaming, one Pyro 5 sends to up to four receivers, as well as auto dual-band 2.4/5 GHz hopping and auto-frequency hopping.
More Details
Top Seller
In Stock
No Store Display
Free Expedited Shipping
Protect Your Gear
Add a protection plan from $59.99
Ask an Expert
800-606-6969
See any errors on this page?

Is this monitor compatible with the Nikon Z8?

Is this monitor compatible with the Nikon Z8?
Asked by: Nelson
Yes, the Hollyland Pyro 5 Wireless Transceiver Monitor can be used with the Nikon Z8 Mirrorless Camera.
Answered by: John W
Date published: 2026-01-07

Can this control an FX6? If so what can it ...

Can this control an FX6? If so what can it control?
Asked by: Christian
Camera control for the Sony FX6 Full-Frame Cinema Camera is not supported by the Hollyland Pyro 5 Wireless Transceiver Monitor.
Answered by: John W
Date published: 2025-09-05

Can I monitor my own shot with this but quick ...

Can I monitor my own shot with this but quick switch to another signal coming in from a 2nd camera running this monitor?
Asked by: Andrew
The Hollyland Pyro 5 Wireless Transceiver Monitor does not support two wireless sources. Multi-Cam Switching can be done when connecting one source to the HDMI and the other SDI input.
Answered by: John W
Date published: 2025-09-10

Which receiver can I Use?

Which receiver can I Use?
Asked by: Johann
The Hollyland Pyro 5 Wireless Transceiver Monitor is compatible with all Hollyland Pyro series receivers such as the Hollyland Pyro H 4K HDMI Wireless Video Receiver, B&H # HOPYROHRX.
Answered by: Elliot A
Date published: 2025-08-22

Is the Pyro 5 back-compatible with the Hollyland ...

Is the Pyro 5 back-compatible with the Hollyland Mars 4K?
Asked by: Audun
No, the Hollyland Pyro 5 Wireless Transceiver Monitor is not compatible with the Hollyland Mars 4k Wireless Video Transmission System.
Answered by: Jonathan S
Date published: 2025-09-01

Concerning the 40 minutes recording limit, once th

Concerning the 40 minutes recording limit, once the recording stops automaticaly can I hit record immediately to continue recording with a new file?
Asked by: Ken
Yes, you could make another recording by creating a new clip when using the Hollyland Pyro 5 Wireless Transceiver Monitor.
Answered by: Chris H
Date published: 2026-05-11

Can the Pyro 5 Monitor wirelessly transmit to a ...

Can the Pyro 5 Monitor wirelessly transmit to a Pyro 7 Monitor transceiver? Are they compatible?
Asked by: Steven
Yes, the Hollyland Pyro 5 Wireless Transceiver Monitor can send & receive from the Hollyland Pyro 7 models, but only in HD. 4k would not be supported.
Answered by: Chris H
Date published: 2025-08-25

How loud is the fan? I just returned the M1 ...

How loud is the fan? I just returned the M1 Enhanced monitor because the fan was too loud to record audio if it was anywhere near the camera/mic
Asked by: Chris
The Hollyland Pyro 5 Wireless Transceiver Monitor (B&H# HOPYRO5) has two fan settings: "auto" and "low." Set to "low," it is extremely hard or even impossible to hear it. If it is set to "auto" and is run until it heats up, it can be barely loud enough to be heard by microphones in close proximity in otherwise quiet environments. Since we have not found it to get hot when run in "low" in the conditions in which we've used it or seen it tested, we would recommend running it in "low" if you are using an on-camera microphone. In such a scenario, we would judge it to be extremely unlikely that you would have any problem unless you intend to add a lot of gain in post production to a track from an on-camera microphone recording audio.
Answered by: Yoni S
Date published: 2026-05-11
  • y_2026, m_6, d_4, h_10CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.46
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_18
  • loc_en_US, sid_1908265, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_bhphotovideo
Whatever You Need, We've Got It