Ask Our Experts800-606-6969
Hello, Log InAccount & Orders
Video Chat with a Photography Expert - Live
Key Features
- For Nikon 400mm f/2.8 Vers. I & II & VR
- For Nikon 600mm f/4.0 Version II & VR
This Wimberley Replacement Foot for Nikon 400mm f2.8 and 600mm f/4.0 AF-S takes the place of the tripod collar foot and converts the collar to Arca-style clamp capability without the need for additional quick release plates. Critical mass is reduced & the profile of the lens is lowered, which makes it well suited to use with the Wimberley Sidekick. Every adapter plate is complete with both 3/8"-16 & 1/4"-20 holes to directly attach the lens directly to a monopod or tripod (without an Arca-style clamp) if desired. Drilled holes necessary to attach any of the flash brackets from Wimberley, Really Right Stuff & Kirk Enterprises are also incorporated into the design. This adapter is compatible with the Nikon 400mm f/2.8 AF-S Versions I and II & VR, and the Nikon 600mm f/4.0 AF-S Version II & VR.
More DetailsEach adapter comes complete with all the necessary hardware and tools to make the conversion, as well as retaining screws to prevent the lens from falling to the ground should you mistakenly unscrew the clamp.
Length: 5.5"
Weight: 0.40 lb
See any errors on this page?
Will you still be able to carry the lens by the ...
Will you still be able to carry the lens by the foot after this is installed? What is the distance between the foot and the lens
The Wimberley Replacement Foot for Nikon 400mm f2.8 and 600mm f/4.0 AF-S will allow you to carry the lens by the foot depending on the size of your hand.
Date published: 2024-09-26
600mm II and VR don't seem to align to Nikon ...
600mm II and VR don't seem to align to Nikon naming conventions. Will this fit the Nikon AF-S 600mm f4G ED VR lens?
The Wimberley Replacement Foot for Nikon 400mm f2.8 and 600mm f/4.0 AF-S is compatible with the Nikon AF-S 600mm f4G ED VR lens.
Date published: 2022-08-03
Will this foot work on af-s 400mm 2.8 D ? Thank ...
Will this foot work on af-s 400mm 2.8 D ? Thank you
The Wimberely AP 452 is not compatible with the Nikon AF-S 400mm f/2.8D lens.
Date published: 2022-06-13
What size hex wrench do I need to take off the ...
What size hex wrench do I need to take off the factory foot?
I believe they are M3 with 2.5 hex head that are the size and head of the screw for the original AF-S NIKKOR 400mm F2.8G ED VR. But best is to contact Nikon on that.
Date published: 2022-03-27
question
Will this foot work on the new Nikon AF-S NIKKOR 600mm f/4E FL ED VR Lens?
I asked Wimberley about this as well. It will fit but it is not long enough to find proper balance. Wimberley will be coming out with a foot in June that will fit the FL lenses.
Date published: 2020-04-27
Will this foot work with the Nikoor z400 2.8 x ...
Will this foot work with the Nikoor z400 2.8 x 1.4 lens
