Video Chat with a Lighting Expert - Live

Manfrotto 047-3 Alu-Core for Uncored Paper or Cloth - 12' (3.6 m)

BH #MA0473 • MFR #047-3
Print
Manfrotto 047-3 Alu-Core for Uncored Paper or Cloth - 12' (3.6 m)
In Stock
No Store Display
Free 2-Day Shipping
Ask an Expert
800-606-6969
See any errors on this page?

Do I have to take the seamless off the cardboard ...

Do I have to take the seamless off the cardboard and then roll it back onto the pole? Or does the pole go inside the cardboard? I have the 10 x 20 foot vinyl seamless.
Asked by: Kyle
You would not have to remove the cardboard core as this Alu-Core will slip inside of it.
Answered by: Kirk R
Date published: 2021-02-12

can i make a double at 24' ???

can i make a double at 24' ???
Asked by: vu
Kirk is right about the holders but you could drill new holes. However I will say, I’ve no idea how strong it would be if only supported at the ends.
Answered by: Gareth
Date published: 2020-05-06

What is the Inside Diameter? Wonder about hanging ...

What is the Inside Diameter? Wonder about hanging led lights on crossbar between two autopoles? about every two feet?????
Asked by: Ernie
The inner diameter of the Alu-Core is about 2"
Answered by: Kirk R
Date published: 2020-10-01

Can the ends of the alu-core be cut & shortened?

Can the ends of the alu-core be cut & shortened?
Asked by: DANIEL G
Absolutely. Hack saw with fine blade. Been there, done that. L
Answered by: Leland
Date published: 2021-11-25

I have purchased three of these to use with ...

I have purchased three of these to use with Savage seamless rolls, and installed them, on a wall mount - but when I roll them the metal tube and the cardboard core dont have enough friction, so they move independently of each other and therefore completely unravel the paper - any suggestions?
Asked by: Nadia
I have used Alu core in 9 and 12 versions, we use inexpensive draw pads that are like textured rubber used to keep things from sliding around, we wrap the ends of the Alu core securing with gaffer tape, works very well, your core will no longer slip on the cardboard core
Answered by: Thomas
Date published: 2021-08-18

Can the inside part that fits into the other pole ...

Can the inside part that fits into the other pole be removed to use only 1 section a 6' bar & insert varidrives into each end?
Asked by: Rachel
No, the Manfrotto 047-3 Alu-Core for Uncored Paper or Cloth - 12' (3.6 m) can not be used taken apart and half used with the vairdrives.
Answered by: Rob K
Date published: 2023-05-18

Does the pole sag in the middle when stretched to ...

Does the pole sag in the middle when stretched to 12’?
Asked by: Drew
No, the crossbar is well made and sturdy.
Answered by: Rob
Date published: 2020-09-03

Will this hold a 140in savage seamless with ...

Will this hold a 140in savage seamless with minimal bowing?
Asked by: Casey
The Manfrotto 047-3 Alu-Core for Uncored Paper or Cloth - 12' (3.6 m) (B&H# MA0473) is designed to hold a 140" (3.55m) background with only minimal bowing in the middle.
Answered by: Yoni S
Date published: 2026-02-02
  • y_2026, m_6, d_3, h_11CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.46
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_16
  • loc_en_US, sid_546389, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_bhphotovideo
Whatever You Need, We've Got It