This Super Clamp with T-Handle from Impact is a versatile and solid grip tool that's a must-have in every grip kit. The screw-operated jaws fit any shape of tube or flat surface with widths from 0.5 to 2.1", and the single-piece cast alloy construction is strong enough to support up to 33 lb. This clamp is ideal for creating mounting points on C-stands, light stands, and other tubes and pipes, and will easily hold lights, modifiers, and crossbars. For additional functionality, a furniture wedge is included for a firm grip on flat surfaces like shelves, tabletops, and doors. The ergonomic twist handle is large enough to comfortably fit in your hand and allows the clamp to be securely tightened to any surface required.
Ask Our Experts800-606-6969
Hello, Log InAccount & Orders
Video Chat with a Lighting Expert - Live
Key Features
- Load Capacity: 33 lb
- Ergonomic T-Handle
- 0.5 to 2.1" Jaw Capacity
- Jaw Lined with Rubber Pads
This Super Clamp with T-Handle from Impact is a versatile and solid grip tool that's a must-have in every grip kit. The screw-operated jaws fit any shape of tube or flat surface with widths from 0.5 to 2.1", and the single-piece cast alloy construction is strong enough to support up to 33 lb. This clamp is ideal for creating mounting points on C-stands, light stands, and other tubes and pipes, and will easily hold lights, modifiers, and crossbars. For additional functionality, a furniture wedge is included for a firm grip on flat surfaces like shelves, tabletops, and doors. The ergonomic twist handle is large enough to comfortably fit in your hand and allows the clamp to be securely tightened to any surface required.
More DetailsIn Stock
Protect Your Gear
Add a protection plan from $1.99
See Options
Impact Super Clamp Overview
T-Handle
The ergonomic twist handle comfortably fits in your hand and allows you to securely tighten the clamp to your choice of surfaces. The low-profile T-handle is also convenient for tightening the clamp in close or hard-to-reach spaces.
33 lb Load Capacity
Lights, cameras, umbrellas, shelves, crossbars, and other light grip gear are easily supported by the Super Clamp. The heavy-duty cast alloy construction grabs and firmly holds anything it can clamp onto.
Rubber Grip Pads
The clamp's jaws are lined with rubber pads for extra gripping power and to ensure that clamped surfaces won't be scratched.
1/4"-20 Mounting Socket
A 1/4"-20 mounting socket allows accessories like microphones and LED lights to be added to your setup.
5/8" Stud
The included 5/8" stud has a hexagonal end that prevents twisting once it is inserted and locked into the receiver. For compatibility, the stud features a 1/4"-20 threaded tip for attaching cameras, LED lights, or any other accessory with a 1/4"-20 socket.
Safety Lock
To ensure that attachments stay securely attached to the Super Clamp, the 5/8" stud locks into the receiver and cannot be released until the safety lock button is pressed.
Furniture Wedge for Flat Surfaces
The included wedge insert gives the clamp a matching flat surface for when you need to attach it to a flat surface like doors, tabletops, or shelves.
UPC: 847628563360
Impact Super Clamp Specs
| Clamp Type | |
| Jaw Shape | |
| Load Capacity | |
| Color |
Mounting
| Mounting | |
| Clamping Range |
General
| Materials | |
| Weight |
Packaging Info
| Package Weight | |
| Box Dimensions (LxWxH) |
Impact Super Clamp Reviews
Review for Impact Super Clamp with T-Handle (Black)
By Timothy
Rated 5 out of 5
Date: 2026-08-19
The Impact Super Clamp with T-Handle (Black) was on sale, and I have used super clamps for 30 years! I have my Mathews others, and I bought 6 more of the IMPACT Brand, yes that is the brand. The little rubber spacer pulls out of the clamp's inside and easily clips under the side tightening bolt. to be clear I have like 45 Autopoles and even more Super clamps, these are great. Their like extra hands. Maybe I will add photos later.
Great clamp, would buy again!
By Guy
Rated 5 out of 5
Date: 2026-03-19
I bought this for a DIY copy stand so I could scan film with a DSLR. I can say that it's kept said camera and lens in place for days on end.
See any errors on this page?
If the stud was oriented horizontally, parallel ...
If the stud was oriented horizontally, parallel to a table, could the 1/4-20 screw end hold 5-10 lbs. without snapping off? If not, is there a stud like this made out of steel, like a QR plate's screw?
I've never tried it in that configuration but would say yes but that weight would be the limit. It is a sturdy clamp. With that much weight, make sure it's secure and you might want to tether whatever you're clamping down. I'm assuming it's a camera. Hope that helps and good luck.
Date published: 2021-05-05
WHAT ARE THE OUTSIDE DIMENSIONS ?
WHAT ARE THE OUTSIDE DIMENSIONS ?
This Impact Super Clamp measures 1 5/8" wide by 4 7/8" long.
Date published: 2022-12-21
question
Does it mount onto Impact Light Stand, Black (6') B&H # IMLS6B MFR # LS-6B?
Yes, it will clamp onto the Impact stands...or any stand. It's very versatile and clamps onto almost anything.
Date published: 2018-08-28
Will this mate with a Manfrotto superclamp? Are ...
Will this mate with a Manfrotto superclamp? Are they essentially identical in design? (I want to connect two superclamps together and I already own one superclamp.)
Yes this will work.
Date published: 2022-10-20
Is this large enough to clamp securely to a 46mm ...
Is this large enough to clamp securely to a 46mm diameter Varipole?
Yes, the Impact Super Clamp with T-Handle can fit an Impact Varipole.
Date published: 2023-01-24
question
Hi Can I attach a gimbal head to the clamp?,I want to clamp it to a shelf in a hide with gimbal head attached to mount my camera and large prime lens to.I believe the clamp can hold 30lbs is that correct?
You could attach a gimbal head to this clamp since it can hold up to 33 lbs. To get the head attached, you can use the Manfrotto 208HEX Head Mounting Plate with Hex Stud - 3/8 Thread B&H # MA208HEX which has a 3/8 male thread. Please see the image below for reference.
Date published: 2018-08-28
The center hole is 1/4"-20. The two horizontal ...
The center hole is 1/4"-20. The two horizontal threaded holes are some other size. The two vertical holes are not threaded. Outside of the 1/4"-20 center hole uses, what accessories use these patterns?
The smaller holes on the back of the Super Clamp allow you to connect accessories to the Super Clamp. As an example, when holding multiple backgrounds on an autopole using a Super Clamp, you may connect the Manfrotto 045 Background Triple Hooks for Three Backgrounds (Box of 2), B&H # MA045, or the Impact Background Triple Hooks - Pair (Black), B&H # IMVPDH3W, via hex screws, or you may connect a single background hook such as the Impact ME-122P Single Background Holder Hooks for Super Clamps (2-Pack), B&H # IMME122P, which may be inserted into the hexagonal 5/8" hole on the back of the unit. There may be other accessories that would also work with the attachment points on a Super Clamp, but the ones listed above would be the popular ones and the ones we carry. We do also carry Super Clamp options that have a grip head connected to the Super Clamp, or connects two Super Clamps together.
Date published: 2020-10-13
What is the depth of the two M5 threaded holes? ...
What is the depth of the two M5 threaded holes? (So I can purchase the right M5 bolt length) Thanks in advance.
The M5 threaded holes are 15mm deep.
Date published: 2021-05-11
