Ask Our Experts800-606-6969
Hello, Log InAccount & Orders
Networked Audio Systems & Components
558 Items
Filter by:
Sort by:
View:
New Release
KanexPro Dante Bluetooth Audio Input Adapter with APTX-LL & APTX-HD
BH # KAAUDDTEBT MFR # AUD-DTE-BT
Key Features
- Bridges Bluetooth 5.1 Audio to Dante
- Full High-Quality Codec Support
- Built on Dante Ultimo 2x2 Platform
- Front-Panel Pair Button with Status LED
Digital
Audinate Dante Virtual Soundcard PRO Software Token (3-Year)
BH # AUDVS04TK3Y MFR # DVS-04-TK-3Y
Key Features
- Redeemable for Permanent DVS License
- Up to 128 Bidirectional Audio Channels
- Up to 64 Dante Flows
- Up to 32-Bit Audio
Available in other Styles, Configurations & Kits
Allen & Heath DT20-M Dante Input Interface with No Power Supply
BH # ALAHDT20M MFR # AH-DT-20-M
Key Features
- 48 kHz / 96 kHz
- Two Combo XLR-1/4" Mic/Line Inputs
- PoE Powered or 12 VDC
- Power Supply Not Included
Available in other Styles, Configurations & Kits
RDL Network to Digital Audio Interface
BH # RDSFND2 MFR # SF-ND2
Key Features
- Converts Two Dante Network Audio Signals
- AES/EBU or S/PDIF Coaxial or Optical Output
- Transformer-Isolated AES/EBU Output
- Special Software Not Required for Setup
Studio Technologies Model 342 Intercom Station
BH # STM342 MFR # M342
Key Features
- Dante-over-Ethernet Technology
- Two Talk and Two Listen Channels
- Supports Dynamic and Electret Mics
- 5-Pin Female XLR Headset Connector
Shure ANI4OUT 4-Channel Dante Mic/Line Audio Network Interface Unit (XLR Outputs)
BH # SHANI4OUTXLR MFR # ANI4OUT-XLR
Key Features
- Four XLR Analog Outputs
- Single Ethernet Port
- LEDs Indicate Device Status/Audio Signal
- Crestron & AMX Control Strings
Available in other Styles, Configurations & Kits
Yamaha DANTE-MY16-AUD2 16-Channel Dante Network I/O Card
BH # YADANTMY16A2 MFR # DANTEMY16AUD2
Key Features
- 16 Channels of I/O
- 44.1, 48, 88.2, and 96 kHz Sample Rate
- 16-, 24-, or 32-Bit PCM
- Two Gigibit Ethernet Connectors
BSS Audio BLU-50v2 4x4 Signal Processor with BLU Link
BH # BSBLU50V2 MFR # BLU-50
Key Features
- 4 Analog Inputs with 48V Phantom Power
- 4 Analog Outputs
- Configurable Signal Processing
- 48-Channel Digital Audio Bus
Turtle AV Mineola 8x8 Dante Audio Bridge
BH # TUVMINEOLA8X MFR # TAV-MINEOLA8XLR
Key Features
- Connect Between Dante and Analog XLR
- 8 XLR-1/4" Combo Input Jacks
- 8 XLR 3-Pin Output Jacks
- Primary & Secondary etherCON Dante Ports
Studio Technologies Model 545DC Dante to 2-Channel Party Line Intercom Interface
BH # STM545DC MFR # M545DC
Key Features
- For Broadcast and Theater Applications
- Integrate 2 Single-Channels Into Dante
- Dante Audio-Over-Ethernet Technology
- Analog Hybrids With Audio Null
AtlasIED Atmosphere 4-Zone Audio Processor
BH # ATAZM4 MFR # AZM4
Key Features
- Control Unit for AZM Audio Systems
- Powerful DSP I/O Processing
- Built-In Messenger/Virtual Controller
- Bell Scheduler
Turtle AV Dante Domain Bridge
BH # TUDDB MFR # TAV-DDB
Key Features
- Bridge Separate Dante Domains
- 32-Channel Bidirectional Throughput
- Dante and PoE Redundancy
- Real-Time Sample Rate Conversion
Shure Intellimix Foundation System Base for Microsoft Teams Rooms
BH # SHIMXF5 MFR # IMXF5
Key Features
- Teams Rooms Compute with DSP
- Optimized for Shure Ecosystem
- Built-In IntelliMix Room Engine
- Dante I/O for Flexible Routing
$3,50000
Special Order
Expected availability: 2-4 Weeks
This item cannot be canceled or returned.
Studio Technologies Model 5482 64-Channel Dante Audio Bridge
BH # STM548202 MFR # M5482-02
Key Features
- Interconnect Dante Between LAN Networks
- 64-Input, 64-Output Bi-Directional Dante
- AES67 and Dante Domain Manager Support
- Up to 24-Bit / 96 kHz Sampling
Shure MXCWAPT-A Access Point Receiver (US)
BH # SHMXCWAPTA MFR # MXCWAPT-A
Key Features
- Manages Audio, Routing, and Frequencies
- Controls up to 125 Wireless Units
- Selects Clearest Channel in 2.4 or 5 GHz
- Switches Channels to Avoid Interference
Available in other Styles, Configurations & Kits
Turtle AV Pro Dual-Channel Dante to Analog Euroblock Line Output Adapter
BH # TUVD2LDEPRO MFR # TAV-D2LDE-PRO
Key Features
- Converts 2-Channel Dante to Analog Audio
- 2 Block Outputs, 1 RJ45 Dante Input
- Up to 24-Bit / 96 kHz Dante Output
- 3-Level Output Gain Adjustment
New Release
KanexPro Dante 2-Channel XLR Output Adapter
BH # KAADTEXLROUT MFR # AUD-DTE-XLROUT
Key Features
- Converts Dante Digital Audio to Analog
- Supports up to 96 kHz at 24-Bit
- 1/2/5 ms Latency via Dante Controller
- Five Discrete Gain Levels
New Release
KanexPro Dante 2-Channel XLR Input Adapter
BH # KAADTEXLRIN MFR # AUD-DTE-XLRIN
Key Features
- Converts 2-Channel Analog to Dante Audio
- Dante Sampling up to 96 kHz at 24-Bit
- 1/2/5 ms Latency via Dante Controller
- Integrated 11.8" XLR Cable Leads
New Release
KanexPro Dante 2-Channel Line Output Adapter
BH # KAADTELINEO MFR # AUD-DTE-LINEOUT
Key Features
- Converts Dante Digital Audio to Analog
- Supports 44.1/48/88.2/96 kHz at 24-Bit
- 1/2/5 ms Latency via Dante Controller
- Five Discrete Gain Levels
New Release
KanexPro Dante 2-Channel Line Input Adapter
BH # KAADTELINEIN MFR # AUD-DTE-LINEIN
Key Features
- Converts 2-Channel Analog to Dante Audio
- Dante Sampling up to 96 kHz at 24-Bit
- 1/2/5 ms Latency via Dante Controller
- AES67 Compatibility
KanexPro 2-Channel Dante to Analog Audio Decoder with PoE
BH # KAADTEDCODE MFR # AUD-DTE-DCODE
Key Features
- Decodes Dante Audio to Analog Audio
- Balanced and Unbalanced Analog Output
- 6-Pin Block 2-Ch Analog Audio Output
- 24-Bit PCM 2.0 at 44.1, 48, and 96 kHz
Available in other Styles, Configurations & Kits
Allen & Heath IP4 Four Button Programmable Decora Wallplate Controller (Black)
BH # ALAHIP4B MFR # AH-IP-4B
Key Features
- Mute, Preset Recall, Level, and Source
- Works with AHM, Avantis & dLive Systems
- PoE Powered, Illuminated Buttons
- Simple to Use
Available in other Styles, Configurations & Kits
Allen & Heath IP4 Four Button Programmable Decora Wallplate Controller (White)
BH # ALAHIP4W MFR # AH-IP-4W
Key Features
- Mute, Preset Recall, Level, and Source
- Works with AHM, Avantis & dLive Systems
- PoE Powered, Illuminated Buttons
- Simple to Use
Available in other Styles, Configurations & Kits
Allen & Heath DT02-X Dante Output Interface with Power Supply
BH # ALAHDT02X MFR # AH-DT-02-X
Key Features
- 48 kHz / 96 kHz
- Two XLR Outputs
- PoE Powered or 12 VDC Power Supply
- EtherCon Connector
Available in other Styles, Configurations & Kits
AMX CE-COM2 Universal Control Extender with 2 Serial Ports
BH # AMXCEB003 MFR # AMX-CEB003
Key Features
- Interface with Serial-Control Devices
- Deliver Hardware Control to IP Gear
- Open Control API
- HControl Native
Studio Technologies Model 5204 Dual Analog Line Input to Dante Interface
BH # STM5204 MFR # M5204
Key Features
- For Dante AoIP Audio Environments
- RJ45 Ethernet Port with Status LEDs
- Two XLR 3-Pin Balanced Line-Level Inputs
- 3.5mm TRS Unbalanced Line Input (2 Ch.)
RDL AV-NH1 Dante Network to Stereo Headphone Amplifier
BH # RDAVNH1 MFR # AV-NH1
Key Features
- Converts Dante to Headphone Output
- Up to 24-Bit/96 kHz Resolution
- 1 x RJ45 Neutrik etherCON Input
- 1/4" & 3.5mm TRS Headphone Outputs
RDL SF-NP40D Network to 40W Stereo Power Amplifier (North American Power Supply)
BH # RDSFNP40D MFR # SF-NP40D
Key Features
- Converts Two Dante Network Audio Signals
- 44.1, 48, 88.2, and 96 kHz Sample Rates
- No Special Software Required for Setup
- LED Indicator for Network Sync
Available in other Styles, Configurations & Kits