Ask Our Experts800-606-6969
Hello, Log InAccount & Orders
Whirlwind Accusonic+2 XLR Male to XLR Female Microphone Cable (25')
BH # WHMK425 MFR # MK425
Key Features
- Highly Flexible
- Resistant to Handling Microphonics
- Braided Shield for Noise Rejection
Available in other Styles, Configurations & Kits
Whirlwind WP2/4NDH 2-Gang Wall Plate Punched for 4 Neutrik XLR Terminals (Stainless Steel Finish)
BH # WHWP24NDH MFR # WP2/4NDH
Available in other Styles, Configurations & Kits
Whirlwind IMP 2 Direct Box
BH # WHIMP2 MFR # IM2
Key Features
- 1/4" Parallel In/Out Jacks
- Ground-Lift Switch Isolate Hum and Buzz
- Built-In TRHL Transformer
Whirlwind QBOX - Audio Line Tester/Test Tone Generator
BH # WHQB MFR # QBOX
Key Features
- For Live Sound and Installations
- Test Audio Lines, Generate Test Tones
- Built-In Microphone and Speaker
- Monitor Intercom Lines, Squawk Box
Whirlwind pcDI Stereo Line Interface
BH # WHPCDI MFR # PCDI
Key Features
- RCA, 3.5mm TRS, 1/4" TS Inputs
- XLR Outputs
- Per-Channel Ground Lift
- 20 dB Pad
Whirlwind PLR-PS1 Rackmount Power Link Electrical Distributor
BH # WHPLRPS1 MFR # PLR-PS1
Key Features
- 5 x Hubbell TR Duplex Outlets
- powerCON 20A Inlet & Outlet
- 15A Hydraulic Circuit Breaker
- EMI Filtering
Whirlwind WP1B/1NDH 1-Gang Wall Plate Punched for 1 Neutrik XLR Terminal (Black Finish)
BH # WHWP1B1NDH MFR # WP1B/1NDH
Available in other Styles, Configurations & Kits
Whirlwind WP2B/4NDH 2-Gang Wall Plate Punched for 4 Neutrik XLR Terminals (Black Finish)
BH # WHWP2B4NDH MFR # WP2B/4NDH
Available in other Styles, Configurations & Kits
Whirlwind pcUSB - Computer Audio USB Interface
BH # WHPCUSB MFR # PCUSB
Key Features
- Two Balanced XLR-3M Output Connectors
- Ground Lift Switch
- Mono and Stereo Switch
- Pad On/Off Switch
Whirlwind Isopod Stereo TRS to Mono XLR Balancer
BH # WHISOPOD MFR # ISOPOD
Key Features
- iPod and MP3 Player Balancer
- Unbalanced to Balanced Summing
- Stereo 3.5mm to Mono XLR
- Connect Portable Players to Consoles
Whirlwind Medusa 8-Channel Multitrack XLR Audio Snake (Blue, 25')
BH # WHMT8FM25 MFR # MT-8-F-M-25
Key Features
- Connect Multitrack/Outboard to Console
- 8 XLR-M to 8 XLR-F Snake (25')
- Heat-Shrunk Fanout at Each End
- Made in the USA
Available in other Styles, Configurations & Kits
Whirlwind Medusa 12-Channel Multitrack XLR Audio Snake (Blue, 10')
BH # WHMT12FM10 MFR # MT-12-F-M-10
Key Features
- Connect Multitrack/Outboard to Console
- 12 XLR-M to 12 XLR-F Snake (10')
- Heat-Shrunk Fanout at Each End
- Made in the USA
Available in other Styles, Configurations & Kits
Whirlwind WP1/1NDH 1-Gang Wall Plate Punched for 1 Neutrik XLR Terminal (Stainless Steel Finish)
BH # WHWP11NDH MFR # WP1/1NDH
Available in other Styles, Configurations & Kits
Whirlwind Accusonic+2 XLR Male to XLR Female Microphone Cable (10')
BH # WHMK410 MFR # MK410
Key Features
- Highly Flexible
- Resistant to Handling Microphonics
- Braided Shield for Noise Rejection
Available in other Styles, Configurations & Kits
Whirlwind 4 Conductor Speaker Cable, Speakon to Speakon (12 Gauge) - 25'
BH # WHNL4025 MFR # NL4-025
Available in other Styles, Configurations & Kits
Whirlwind Medusa 8-Channel Multitrack XLR Audio Snake (Blue, 10')
BH # WHMT8FM10 MFR # MT-8-F-M-10
Key Features
- Connect Multitrack/Outboard to Console
- 8 XLR-M to 8 XLR-F Snake (10')
- Heat-Shrunk Fanout at Each End
- Made in the USA
Available in other Styles, Configurations & Kits
Whirlwind WP2/2NDH 2-Gang Wall Plate Punched for 2 Neutrik XLR Terminals (Stainless Steel Finish)
BH # WHWP22NDH MFR # WP2/2NDH
Available in other Styles, Configurations & Kits
Whirlwind CAB DRIVER Speaker Component Checker
BH # WHCABDRIVER MFR # CAB DRIVER
Key Features
- Pink Noise Generator
- Multiple Connector Types
- Pushbutton Selectors
- DC Ohms Test
Whirlwind PB12-SKB 1-Line In/12-Mic Out Passive Press Box with SKB Case
BH # WHPB12SKB MFR # PB12-SKB
Key Features
- For Press Conference Situations
- Use with PRESSPOWER 3 or PRESSMITE Box
- 1 x Line-Level Input
- 12 x Mic-Level Outputs
Available in other Styles, Configurations & Kits
Whirlwind WPIDWH/2NDH Custom Wall Plate Prepunched for 2 Neutrik D Connectors (White)
BH # WHWPIDWH2NDH MFR # WPIDWH/2NDH
Key Features
- Prepunched for 2 Neutrik D Connectors
- Fits Single-Gang Junction Boxes
- White Finish
- 1/16" Thick
Whirlwind Lifter In-Line XLR Barrel Ground Lifter
BH # WHL MFR # LIFTER
Key Features
- Good for Troubleshooting Ground Problems
- Female-to-Male XLR 3-Pin
- Isolates Ground of Balanced Audio Signal
- Saves You from Cutting Cable Shield Wire
Whirlwind In-Line XLR Barrel 20 dB Pad
BH # WHIMPAD20 MFR # IMPAD20
Whirlwind Accusonic+2 XLR Male to XLR Female Microphone Cable (3')
BH # WHMK403 MFR # MK403
Key Features
- Highly Flexible
- Resistant to Handling Microphonics
- Braided Shield for Noise Rejection
Available in other Styles, Configurations & Kits
Whirlwind Accusonic+2 XLR Male to XLR Female Microphone Cable (15')
BH # WHMK415 MFR # MK415
Key Features
- Highly Flexible
- Resistant to Handling Microphonics
- Braided Shield for Noise Rejection
Available in other Styles, Configurations & Kits
Whirlwind NL4 Speaker Cable (3')
BH # WHNL4003 MFR # NL4-003
Key Features
- 12 AWG / 4-Conductor SJ Wire
- Lightweight and Flexible
- Screw Terminal and Soldered Connections
- Lifetime Warranty
Available in other Styles, Configurations & Kits
Whirlwind 4 Conductor Speaker Cable, Speakon to Speakon (12 Gauge) - 5'
BH # WHNL4005 MFR # NL4-005
Available in other Styles, Configurations & Kits


