GyroVu Heavy-Duty Articulated Arm Mount with Adjustable Clamp (11")
- Attach Accessories to Various Rods/Tubes
- Fits Most Tripod Legs and Light Stands
- Jaw Clamp with T-Handle to 1/4"-20 Screw
- Up to 1.5" Jaw Clamp Opening
Falcam F22 Dual-Head Quick Release Magic Arm Kit
- Two Quick Release Mount Ball Heads
- Two F22 Quick Release Baseplates
- 1/4"-20 Threads, Quick Release Buttons
- 360° Rotation
iFootage MA3-4 Spider Crab Magic Arm with QR Mounting (7")
- 7" Articulating Arm for Attachments
- QR Adapter Ends
- Shoe Adapter on One End
- 1/4"-20, 3/8"-16, and ARRI Anti-Twist
Impact 3 Section Articulated Arm without Bracket
- Aluminum Construction
- 33.46" Long
- Supports 2.2 lb
- Butterfly Locks
Impact 3 Section Double Articulated Arm without Bracket
- Aluminum Construction
- Extendable Sliding Arms
- 33.8" Long
- Supports 10 lb
Tether Tools Rock Solid Master Articulating Arm
- Three Articulating Joints
- Two Rotating 5/8" Ball Joints
- Center Elbow Rotates 360°
- Center Knob Loosens All Joints
Wooden Camera Universal Ultra Arm with Combo 1/4-20 & 3/8-16 (3")
- 4 Points of Articulation
- Interchangeable Mounting Knobs
- Removable Anti-Twist Pins
- 1/4"-20 and 3/8"-16 Center Threads
Noga MG9038CA CineArm MG (Large)
- 3-Joint Mounting Arm
- Kip Lever-Based Central Mechanism
- Horizontal / Vertical Adjustment Support
- Tilt Movement Supported
K&F Concept MS13 Multifunctional Super Clamp with Ball Head Magic Arm
- Super Clamp with 2.3" Jaw Diameter
- Multiple 1/4"-20 Mounting Holes
- Magic Arm with ARRI-Type Locating Pins
- Free Rotation at Multiple Angles on Arm
Pearstone 7.5" Articulating Arm
- 4.2" Joint-to-Joint Length
- 7.5" Fully Extended Length
- Single-Point Locking Mechanism
- 1/4"-20 & Shoe Mounts
SmallRig Crab-Shaped Clamp with Magic Arm and Action Camera Mount
- Clamps on Surfaces 0.6 to 1.6" Deep
- 11.4" Magic Arm with Two Segments
- 180° Mini Ball Head on Both Ends
- Includes Three-Prong Action Camera Mount
Platypod Elbow Support Arm for eXtreme, Ultra & Max Flat Tripods
- Mount Small Accessories
- Works with eXtreme, Ultra & Max Tripods
- Maximum Load of 5 lb
- 1/4"-20 Screws on Either End
SmallRig HawkLock H21 Quick Release Rosette Magic Arm (11")
- Adjustable Ball Heads on Both Ends
- HawkLock NATO Clamp on Each End
- Compact NATO Mounts with 1/4"-20 Screws
- Rubber Padding on Thumbscrew Mounts
iFootage LT4-5.5 Spider Crab Magic Arm (9.5")
- 9.5" Articulating Arm for Attachments
- Shoe Adapter on One End
- 1/4"-20 Screw Mount on Other End
- Mount Light, Monitor, Camera
SmallRig HawkLock H21 Magic Arm + 1/4"-20 Quick Release Mount Kit (7")
- 7" Quick Release Rosette Magic Arm
- Universal 1/4"-20 Quick Release Mount
- Ball Heads and HawkLock NATO Clamps
- 1/4"-20 Anti-Twist Head on QR Plate
Noga NF9038CA CineArm NF (Small)
- 3-Joint Mounting Arm
- Kip Lever-Based Central Mechanism
- Horizontal / Vertical Adjustment Support
- Tilt Movement Supported
Tilta Micro Articulating Arm
- 5.2" Articulating Arm with 2 Ball Heads
- For Monitors, Viewfinders, Lights & More
- 1/4"-20 Screw on Each End
- Aluminum Alloy & Steel Construction
SmallRig Dual-Head Crab-Style Clamp
- Dual Ball Head Magic Arm
- 2 Crab-Style Clamp Mounts
- Clamps Mount on Surface 0.6 to 1.6" Wide
- 3.3 lb Load Capacity, Rubber Padding
CAMVATE Crab Super Clamp with 7" Magic Arm
- Finely Position a Light, Mic, or Camera
- 7" Articulating Magic Arm
- Mini Ball Heads with 360° Rotation
- Crab Super Clamp
CAMVATE Flexible Gooseneck Arm with Heavy-Duty C-Clamp
- Heavy-Duty C-Clamp
- Flexible Gooseneck with 1/4"-20 Screw
- 0.1 to 1.65" Clamping Range
- Multiple 1/4"-20 and 3/8"-16 Threads
Axler AA-7 Recodo Articulating Arm (7")
- Three Points of Articulation
- Unfolds to 7" Long
- Metal Construction
- Supports 8 Pounds
Dinkum Systems Clamp-to-Clamp
- For Surfaces 1 to 2" Thick
- 7" Length with 1" Clamp and 2" Clamp
- A Multitude of Uses
SmallRig HawkLock H21 Magic Arm + 1/4"-20 Quick Release Mount Kit (11")
- 11" Quick Release Rosette Magic Arm
- Universal 1/4"-20 Quick Release Mount
- Ball Heads and HawkLock NATO Clamps
- 1/4"-20 Anti-Twist Head on QR Plate
Falcam F22 Quick Release 7" Extension Magic Arm Kit
- Two Quick Release Mount Ball Heads
- Two F22 Quick Release Plates
- 1/4"-20 Screws with Locating Pins
- 360° Rotation, 5 lb Load Capacity
Matthews Infinity Arm
- Super-Strength Modular Cine Arm
- 32 lb Capacity (15 lb Horizontally)
- Two 1/4"-20 & One 3/8"-16 Tip Included
- Nine Different Accessory Tips Supported
Ulanzi R102 Double Ball Head Magic Arm with 1/4"-20 Screws
- 3.5" Magic Arm
- Dual Ball Heads Tilt 180°
- Two 1/4"-20 Screws
- 2.2 lb Load Capacity
CAMVATE Super Clamp & 3.5" Arm with Dual 1/4"-20 Ball Head Mounts
- Mounts 1/4"-20 Thread Accessory
- 3.5" Arm with Dual Mini Ball Heads
- 1/4"-20 Screw on Each End
- Maximum Clamp Opening: 1.6"
Axler 4.5" Ball Clamp Arm with Cold Shoe Mount
- 1/4"-20 Ends with Ball Joints
- Replaceable Clamping Cold Shoe Mount
- Center Knuckle Tightens Both Arms
Learning About Articulating Camera Arms
Articulating arms improve comfort for video technicians, by offering a hands-free monitor viewing experience. Articulating monitor arms have various load capacities to give options for heavier camera and video equipment. Use production monitor mounting brackets and heavy-duty arms for lighting and audio equipment. Mount smaller lights, microphones, audio recorders, and other camera and video accessories from miniature arms for improved flexibility during your productions.
Mounting Equipment for Articulating Arms
Monitor arms can mount to cameras, tripods, C-stands, and other compatible production equipment. Using professional video monitor rackmounts and swing arms offers better coverage, as the arms may have 360-degree joint rotation. Heavy-duty articulating arms have adjustable arm length that easily changes to offer greater reach for audio and video equipment. Some monitor arms mount with clamps or clips, while others use accessories such as shoe mounts and 1/4 to 20" adapters and screws. For quick equipment and arm adjustments, use non-screwing arms with quick-release mechanisms.
Choosing Monitor Extension Arms
Swing arms are easy to move horizontally and vertically for increased mobility and range of audio or visual equipment. Heavy-duty arms can hold larger gear steady without bending under the extra weight. Articulating arms have flexible end joints that can pivot at a 90-degree angle for increased function on production sets. Single-point locking mechanisms provide stable support for your equipment and monitor arms. Ratcheting joints provide more security against arms swinging or moving if bumped. Use easily adjustable, three-point ratcheting arms with locking levers for expanded stability. Get steady shots from multiple angles with monitor arms in different sizes and styles.
B&H Photo and Video supplies articulating swing, magic, heavy-duty, and friction arms for a hands-free monitor viewing solution. Browse a large selection of cameras, camcorders, tripods, arms, and other professional video production equipment and accessories.



