Video Chat with a Photography Expert - Live

Sirui 3T-35K Table Top Tripod (Black) and Xuma Smartphone Mount Kit

BH #SISU3T35KMK (B&H Kit)
Print
Sirui 3T-35K Table Top Tripod (Black) and Xuma Smartphone Mount Kit
Key Features
  • Load Capacity: 8.8 lb
  • Maximum Height: 13.4"
  • Minimum Height: 4.5"
  • Folded Length: 9.5"
Elevate your smartphone photography with the 3T-35K Table Top Tripod (Black) and Xuma Smartphone Mount Kit from B&H, so you can gain that level of sharpness in your images without hand holding your phone.
More Details
In Stock
Free 2-Day Shipping
Protect Your Gear
Add a protection plan from $9.99
Ask an Expert
800-606-6969
Kit Contains:

From Manufacturer

Elevate your smartphone photography with the 3T-35K Table Top Tripod (Black) and Xuma Smartphone Mount Kit from B&H, so you can gain that level of sharpness in your images without hand holding your phone.

Sirui 3T-35K Table Top Tripod (Black)

The black Sirui 3T-35K Table Top Tripod is a versatile camera support that can also be used as a handheld pole for video shots, selfies, or low- or high-angle shots. It can hold up to 8.8 lb, weighs just 15.2 oz, and reaches 13.4" with its two-section column fully extended. With the column removed and the head installed directly to the legs the tripod has a minimum height of just 4.5".

The ball head has an Arca-type compatible clamp and quick-release plate, and a 90° notch for shooting in portrait mode. The legs of the tripod fold down for extended reach when using it as a selfie pole, or fold up to give you a solid grip to handhold the pole when shooting stills or video. An included carabiner allows you to attach the tripod to a loop for easy transport.

Xuma Smartphone Mount

Take your smartphone photography to the next level with a Xuma Smartphone Mount. This mount fits devices 2.4 to 3.25" wide, holding them in place with a spring-loaded bracket with a rubber coating to protect your device's finish. It features three 1/4"-20 standard tripod threaded holes: one at the top, one at the bottom, and one on the back. This lets you mount your device to a tripod or monopod while still being able to attach 1/4"-20-compatible peripherals, like lights and microphones.

UPC: 847628597662
Kit Contains:

Sirui 3T-35K Table Top Tripod (Black)

Key Specs
Camera / Device Mounting
1/4"-20 Screw (Quick Release Plate: Arca-Type)
Head Type
Ball Head
Drag Control
No
Primary Material
Aluminum
Load Capacity
8.8 lb / 4 kg
Maximum Working Height
13.4" / 34.1 cm
Closed Length
9.5" / 24.1 cm
Weight
15.2 oz / 430 g
Head
Camera / Device Mounting
1/4"-20 Screw (Quick Release Plate: Arca-Type)
Head Type
Ball Head
Base Mount
Flat Base with 3/8"-16 Female
Pan & Tilt
Drag Control
No
Independent Pan Lock
No
Legs
Primary Material
Aluminum
General
Load Capacity
8.8 lb / 4 kg
Maximum Working Height
13.4" / 34.1 cm
Minimum Working Height
4.5" / 11.4 cm
Closed Length
9.5" / 24.1 cm
Weight
15.2 oz / 430 g
Packaging Info
Package Weight
1.36 lb
Box Dimensions (LxWxH)
11.25 x 4.35 x 2.5"

Sirui 3T-35K Reviews

Versatile little tripod

By Steven
Rated 5 out of 5
Date: 2022-08-19

Versatile little tripod. Smartphone mount is extremely tight if you are using a protective cover on a plus size phone.

Glad I bought it!!

By Robert
Rated 5 out of 5
Date: 2021-02-23

It does everything I need and more. Much more solid than I expected. Excellent purchase!!

See any errors on this page?

Will this tripod and ball head hold a Fuji GFX50R ...

Will this tripod and ball head hold a Fuji GFX50R w/ 32-64 lens attached?
Asked by: Steve
Should be no problem. The combined weight of the camera and lens is under 4 lbs. The tripod is rated at: Load Capacity: 8.8 lb.
Answered by: Mark S
Date published: 2019-01-30

question

Can the ARCA-SWISS plate / adapter be removed? Most of my equipment has the Manfrotto quick release PL200 Plates. Can I keep the ball and just swap the adapter out?
Asked by: Bobby B.
Yes, the plate adapters are held on by a universal mounting screw. You can swap them out.
Answered by: Jacob C.
Date published: 2018-08-25

Where is Sirui made?

Where is Sirui made?
Asked by: Bernard E
It's made in China
Answered by: Charles
Date published: 2019-04-06

which head will work best with a sony rx10 IV, ...

which head will work best with a sony rx10 IV, this one or the 10s?
Asked by: angel
Any of the 3T35 series will do the job. the base model you are looking at has over an 8lb capacity. You will see that all Sirui table top tripods are very solid.
Answered by: Sirui
Date published: 2019-07-15

question

Can the head be changed to one I use from a larger tripod?
Asked by: Randy
Yes, the head is interchangeable. You can converter to a monopod. With the standard parts or switch the head completely.
Answered by: Jermaine W.
Date published: 2018-08-25

question

is the arca-type plate standard for area-swiss? meaning will it be easy to throw onto another full size tripod with arca-swiss head? without removing the plate?
Asked by: Anonymous
Yes. The plate that comes with the tripod is standard arca-swiss. Works with my RRS .
Answered by: David W.
Date published: 2021-01-05

question

Hi folks, I would like to use this to mount a Zhiyun Crane gimbal onto. Together with a camera its about 5 lbs. Can you tell me if this monopod feels strong and stable enough for this type of setup? I appreciate your response.
Asked by: Stephen
HelloNo this is not going to be strong enough. I would suggest getting something tested for at least 15lbs for your planned use
Answered by: Derrick P.
Date published: 2018-08-25

question

how good is this tri pod on a canon eos 6D w/ stigma 24mm lens?
Asked by: Romel
I use it with my 6d MarkII with a Sigma 24 -105mm Art lens and also with my Sigma 150 to 600mm telephoto lens. I use to use it with my 1D Mark II.
Answered by: Lawrence C.
Date published: 2018-08-25
  • y_2026, m_7, d_27, h_5CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.48
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_9
  • loc_en_US, sid_1558496, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_bhphotovideo
Whatever You Need, We've Got It