Ask Our Experts800-606-6969
Hello, Log InAccount & Orders
Video Chat with a Pro Audio Expert - Live
Key Features
- 1/4" Parallel In/Out Jacks
- Ground-Lift Switch Isolate Hum and Buzz
- Built-In TRHL Transformer
The IMP 2 from Whirlwind is a rugged built, single-channel, passive direct box. The unit converts a line- or instrument-level unbalanced signal to a low-impedance microphone-level balanced signal.
More DetailsIn Stock
Protect Your Gear
Add a protection plan from $16.00
See Options
See any errors on this page?
Can I plug both stereo unbalanced outputs from my ...
Can I plug both stereo unbalanced outputs from my keyboard mixer into the two 1/4" jacks?
These are meant for mono sources, so you'll need 2; one for left and one for right. The second 1/4" jack is meant as a passthrough
Date published: 2022-09-21
question
what cables are needed for direct box?
atleast a 1/4 TS cable and an xlr, 1/4 out can be used as a through or to run stereo in (parallel) so technically you could have two xlr cables coming in going out the xlr, or your could run one 1/4 TS in and the other out to an amp while running the xlr out
Date published: 2018-08-27
question
what cables do I need to operate a direct box?
You will need an XLR microphone cable to connect to your mixing board and an instrument cable with 1/4 inch connectors to connect your instrument.
Date published: 2018-08-27
