Tripp Lite SMART2200RMXL2U SmartPro Expandable Rack/Tower UPS System

BH #TRSP2200RMXL • MFR #SMART2200RMXL2U
Print
Tripp Lite SMART2200RMXL2U SmartPro Expandable Rack/Tower UPS System
Key Features
  • 8x Outlets
  • 120V Nominal Voltage
  • 2200VA/1600W Power Handling
  • USB & Serial Communication
The SMART2200RMXL2U SmartPro Expandable Rack/Tower UPS System from Tripp Lite is a line interactive voltage regulation and UPS system, built to the stringent requirements necessary for network-grade surge suppression. The UPS offers battery-derived sine wave AC output during power failures and extreme voltage variations. Thanks to line interactive Automatic Voltage Regulation (AVR), two levels of voltage boost are available during brownouts and one level of voltage cut is available during overvoltage conditions, ensuring that a 120V current is maintained over an input range of 83-145V. The UPS features a standard NEMA 5-20P input plug, 4 NEMA 5-15R receptacles, and 4 NEMA 5-15/20R receptacles.
More Details
Special Order
Expected availability: 7-14 Business Days
No Store Display
Free Standard Shipping
Protect Your Gear
Add a protection plan from $79.99
Ask an Expert
800-606-6969

Tripp Lite SMART2200RMXL2U Overview

The SMART2200RMXL2U SmartPro Expandable Rack/Tower UPS System from Tripp Lite is a line interactive voltage regulation and UPS system, built to the stringent requirements necessary for network-grade surge suppression. The UPS offers battery-derived sine wave AC output during power failures and extreme voltage variations. Thanks to line interactive Automatic Voltage Regulation (AVR), two levels of voltage boost are available during brownouts and one level of voltage cut is available during overvoltage conditions, ensuring that a 120V current is maintained over an input range of 83-145V. The UPS features a standard NEMA 5-20P input plug, 4 NEMA 5-15R receptacles, and 4 NEMA 5-15/20R receptacles.

You'll be able to connect the UPS to a computer via USB or serial for monitoring by Mac OS X and Windows. You also have the option of installing an SNMP/Web Card for network management. You can monitor conditions via all three interfaces simultaneously. The included PowerAlert software allows you to monitor equipment load levels, self-test data, and utility power conditions. The Emergency Power Off (EPO) interface shuts down connected equipment safely in the event of a power failure, and an audible alarm and front-panel LEDs make you aware of status information regarding line and battery power operation. The internal battery is able to provide 16 minutes of backup power at half load.

SmartPro line interactive UPS system is ideal for voice, data, medical, and industrial networking applications
Line interactive Automatic Voltage Regulation (AVR) offers two levels of voltage boost during brownouts and one level of voltage cut during overvoltages
Maintains continuous operation through blackouts, voltage fluctuations, and surges
Corrects line voltage conditions as low as 83V and as high as 145V back to selectable 100V/110V/120V nominal values
Standard internal battery set offers 16 minutes at half load (800W) and 6 minutes at full load (1600W)
Optional BP48V24-2U and BP48V60RT3U external rack/tower battery packs enable extended runtime operation
Compact rackmount form factor installs using only 2 rack spaces (2U) with a maximum installed depth of only 19 inches
Ships with all mounting accessories for 4-post rackmount installation
Optional 2POSTRMKITWM enables 2-post rackmount or wallmount installation
Optional 2-9USTAND accessory enables small-footprint upright tower placement
Network interfaces support simultaneous communications via built-in USB, DB9 serial, and SNMPWEBCARD slot
HID compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X
Included PowerAlert UPS monitoring software supports safe unattended shutdown, monitoring and control via local connected servers, with the built-in ability to shutdown any number of additional servers over IP
UPS interface supports on-battery, low-battery, power-restored, AC-voltage, DC-voltage, output current monitoring, battery charge current, battery capacity, AC line frequency, timed inverter shutoff, activate self-test, load bank output power control, and remote reboot
Built-in Emergency Power Off (EPO) interface with cable
NEMA 5-20P input plug; NEMA 5-15R and NEMA 5-15/20R output receptacles
Integrated 3-bank switched PDU enables remote outlet management for load shedding or remote reboot of individual load banks (Each bank controls 1 outlet per load bank)
Front panel LEDs offer current monitoring and battery charge level information
UPS ships fully assembled in full compliance with DOT regulations, no time consuming connection of internal batteries by user required
$250,000 connected equipment insurance (USA, Canada, and Puerto Rico only)
UPC: 037332118059

Tripp Lite SMART2200RMXL2U Specs

Input
Rated input current (at maximum load): 13.3A (120V), 14.6A (110V), 16A (100V)
Nominal Input Voltage Supported: 120VAC
UPS input connection type: 5-20P
Input circuit breaker: 20A
UPS input cord length: 10' (3 m)
Recommended Electrical Service: 20A 120V
Output
Output Volt Amp Capacity: 2200VA
Output Watt Capacity: 1600W
Output Power Factor: 0.7
Nominal Output Voltage Supported: 100V, 110V, 120V
Frequency compatibility: 50/60Hz
Output voltage regulation (Line mode): -14%, +6%
Output voltage regulation (Battery mode): ±5%
Built-in UPS output receptacles: 4x 5-15R outlets, 4x 5-15/20R outlets
Built-in controllable switched load banks: 3 switchable single-outlet 5-15R load banks
Basic PDU options: PDU1220 (1U / 13 5-15/20R outlets); PDUNV (1U / 2 C19, 12 C13 outlets); PDUV20 (0U / 12 5-15/20R outlets); PDU40TDUAL (0U / 40 5-15/20R outlets)
Metered PDU options: PDUMH20 (1U / 13 5-15/20R outlets); PDUMH20AT (1U / 16 5-15/20R outlets)*; PDUMV20 (0U / 16 5-15/20R outlets); PDUMV40 (0U / 32 5-15/20R outlets)
Switched PDU options: PDUMH20ATNET (1U / 16 5-15/20R outlets)*; PDUMV20NET (0U / 24 5-15/20R outlets)
External PDU redundancy options: *Auto Transfer Switch features utilizing the secondary PDU input cord are compatible with Smart Online UPS models only
Output AC waveform (AC mode): Sine wave
Output AC waveform: (battery mode): Sine wave
Surge Energy Rating
570 joules
Battery
Expandable battery runtime: Extended runtime supported via optional external battery packs
External battery pack compatibility: BP48V24-2U (limit 1); BP48V60RT3U (multi-pack compatible)
DC system voltage: 48VDC
Battery recharge rate (included batteries): Less than 4.5 hours from 10% to 90%
Replacement battery cartridge (internal UPS battery replacement): RBC94-2U
Battery Access: Front panel battery access door
Battery replacement description: Hot-swappable, user replaceable batteries
Typical Backup Runtime
Full load: 6 minutes
Half load: 16 minutes
Audible Alarm
Yes
Agency Certifications
Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category A (EMI); ROHS (Reduction of Hazardous Substances)
Compatibility
Mac, Windows
Environmental Requirements
Operating
Temperature: 32-104°F (0-40°C)
Humidity: 0-95%, non-condensing

Storage
Temperature: 5-122°F (-15-50°C)
Humidity: 0-95%, non-condensing
Dimensions
17.5 x 3.5 x 19" (44.4 x 8.9 x 48.3cm)
Weight
64 lb (29.1kg)
Equipment Protection
$250,000
Packaging Info
Package Weight
78.15 lb
Box Dimensions (LxWxH)
23.5 x 20.5 x 9"

Tripp Lite SMART2200RMXL2U Reviews

SmartPro 120V-Great fit for IDF's

By DC the Switch Guy
Rated 5 out of 5
Date: 2018-04-09

I have purchased numerous SmartPro devices for our company and all are bullet proof. I would recommend buy for any satellite switches, or devices that require a 99.999 % uptime.

No-nonsense

By tnbaker0
Rated 5 out of 5
Date: 2017-10-25

This UPS has helped eliminate constant sercer downtime due to power outages. It was a breeze to set hp and well worth the install to have a downtime free couple of months.

See any errors on this page?
Whatever You Need, We've Got It