Ask Our Experts800-606-6969
Hello, Log InAccount & Orders
Key Features
- German Equatorial Mount
- RA & Dec Ball Bearings
- Two Counterweights
- Stainless Steel Tripod
The Omni CG-4 Telescope Mount from Celestron is identical to the mount supplied with all Omni XLT series telescopes. This German equatorial mount offers RA and dec slow-motion controls and setting circles. The included adjustable tripod boasts 1.75" stainless-steel legs and a sturdy center brace/accessory tray. This mounting solution comes packaged with two counterweights to ensure proper balance and control.
More DetailsIn Stock
Protect Your Gear
Add a protection plan from $59.99
See Options
See any errors on this page?
Can I use QHY PoleMaster with CG4 mount? If yes, ...
Can I use QHY PoleMaster with CG4 mount? If yes, what adapter should I use?
ask MFR
Date published: 2021-03-25
What will be the maximum high with legs extended?
What will be the maximum high with legs extended?
Measured straight down from the top of the tripod base to the ground with the legs fully extended, the maximum height is 3' 10.5"
Date published: 2020-02-20
How much weight can cg4 omni handle
How much weight can cg4 omni handle
The Omni CG-4 has a load capacity of 20 lbs.
Date published: 2025-05-16
question
can use this cg 4 mount with a celestron nexstar se8 ?
Yes. I have used this mount with SE8 for several year. My SE8 (C8) weighs about 12 pounds with accessaries and works well with the manual controls.
Date published: 2026-08-21
Does this track objects? I do not see a hand ...
Does this track objects? I do not see a hand controller nor manual knobs.
The The Omni CG-4 Telescope Mount from Celestron does not Track Objects with computer control. The mount does have manual slow-motion controls.
Date published: 2022-06-22
question
Will this mount work with the Astromaster 130EQ dovetail?
Yes it will mount your Optical Tube.
Date published: 2018-08-28
Will it hold a 6” Newtonian reflector weighing ...
Will it hold a 6” Newtonian reflector weighing 11.4 lbs.?
Celestron did not give us the soecification you are asking about. The way to get that information would be to contact Celestron directy:
CelestronTel: 310-328-9560 or 310-803-5955
Website http://www.celestron.com/
Date published: 2020-10-02
question
Is there any way to adjust the declination indicator wheel?
yes, they're is an allen head grub screw around the 70 degree mark on ring. On the side of the declination clutch. Takes a 1.5 mm allen head wrench.
Date published: 2023-02-25