Schoeps W 140 Foam Windscreen for Select CMIT Series Shotgun Microphones (Black)
- For CMIT 5 and MiniCMIT Shotgun Mics
- For KMIT Colette Shotgun Mic Capsule
- For Mild Wind and Careful Boom Movements
- Acoustic Foam
Audix WS10S External Foam Windscreen for ADX10
- Specially Designed for Audix ADX10
- Snap-On Design
- Avoids Popping and Clicking
- Comes in Pack of Five
Sennheiser MZ-2 Accessory Set for MKE-2 Lavalier Microphone
- For Use with MKE-2 Lavalier
- Two Mesh Grilles, One Black & One Beige
- Two Tie Clips, One Black and One Beige
- Two Vampire Clips, One Black & One Beige
Sennheiser MZH 440 Fur Windshield for MKE 440 Stereo Shotgun Microphone
Radius MKH 50 Mushroom Foam and Fur Windcover (24 to 25mm)
- Reduces Wind and Plosive Noise
- Includes 1 Foam & 1 Furry Windscreen
- Fits Sennheiser MKH 50
- Fits 24 to 25mm Diameter Mics
Bubblebee Industries The Windbubble PRO Extreme Fur Windscreen for Omni Lavalier Mics (Black, Small, 2-Pack)
- Wind Protection for Omni Lavalier Mics
- Also for Field Recording & Headset Mics
- Fits Mics 5 to 6.5mm in Diameter
- Inner Foam Core
Radius Replacement Fur Windcover for Rycote BBG Windshield (Black, Single)
- Fits Single Rycote BBG Windshield
- Long-Pile Synthetic Acoustic Fur
- 40 dB Wind-Noise Attenuation
- Preserves High-Frequency Clarity
RODE WS6 Deluxe Windshield for the NTG2, NTG1, NTG4, and NTG4+ Microphones
- Fits Rode NTG2, NTG1, NTG4 and NTG4+
- Soft Wind-muff Texture
- Excellent Wind Noise Protection
RODE WS7 Deluxe Windshield for the NTG3 Microphone
- Fits the Rode NTG3 Shotgun Microphone
- Soft Wind-Muff Texture
- Excellent Wind Noise Protection
Bubblebee Industries The Windkiller SE for DPA 4098 Gooseneck Microphone (Black)
- Fits DPA 4098 Gooseneck Microphone
- Wind-Noise Reduction
- Acoustically Transparent
- Inner Foam Core
Radius Nimbus Windshield for Sanken CS-M1 (Black)
- Sanken CS-M1 Short Shotgun Mic
- Fits Mics 19-22mm in Diameter
- 25 dB of Wind Noise Attenuation
- 2.8" Inner Depth
Radius Nimbus Windshield for Sanken CS-M1 (9.75")
- Attenuates 25 dB of Wind Noise
- Acoustic Synthetic Fur
- Porous Open Cell Foam Core
- Fits 0.74 to 0.86" Hypercardiod Mics
Rycote Baseball Windscreen and Baseball Windjammer Combo Kit (0.7" Diameter Hole)
- Baseball Felt-Covered Windscreen
- Baseball Windjammer
- Increased Performance over Foam
- Up to -40 dB of Wind-Noise Attenuation
Bubblebee Industries Windkiller Long Fur Slip-On Wind Protector for 18 to 24mm Mics (Medium, Black)
- High Performance Inner Foam & Rubber
- Built with Imitation Fur
- Reduces Wind Noise
- Easy to Mount on Microphone
Rycote Cyclone Windjammer for the Cyclone Windshield (Gray, Small)
- For Use with Small Cyclone Windshields
- Up to 60 dB of Wind Noise Attenuation
- Includes Hairbrush
Rycote BBG Windshield for Handheld or Boom-Mounted Interview Mics
Rycote Super Softie Windshield for Shotgun Mic (4.7" Depth, 0.7 to 0.9" Diameter)
- Wind Noise Protection for Shotgun Mic
- 4.7" Inside Depth, 0.7 to 0.9" Diameter
- 3D-Tex Material and Open-Cell Foam
- Slip-On Design
Bubblebee Industries The Spacer Bubble Windshield & Fur Cover System for Shotgun Mics (Black, XS+)
- Reduces Wind Noise
- Fits Microphones 18 to 24mm in Diameter
- 80mm Inner Depth
- The Spacer Bubble Windshield
Bubblebee Industries The Spacer Bubble Windshield & Fur Cover System for Shotgun Mics (Black, Large)
- Reduces Wind Noise
- Fits Microphones 18 to 24mm in Diameter
- 155mm Inner Depth
- The Spacer Bubble Windshield
Sanken Metal Mesh Windscreen for Sanken COS-11s Microphones 10-Pack (Black)
Radius Mini-ALTO 250 Blimp Windshield with RAD-2 Kit & PG Handle (Black, Multi-Pile)
- Full-Coverage 85mm Blimp Design
- Fits Short and Standard Shotguns
- Up to -40 dB Wind Noise Reduction
- RAD-2 Mount Reduces Handling Noise
Rycote Nano Shield Windshield Kit NS4-DB for Microphones up to 10.1" Long
- Complete Windshield & Suspension System
- Improved Acoustic Transparency
- 30% Lighter than Modular Windshield Kits
- Smaller than Modular Windshield Kits
Auray WHF-158 Foam Windscreen for 1-5/8" Diameter Microphones (Red)
- High-Quality Acoustic Foam
- Reduces Wind Noise up to 8 dB
- Reduces Vocal Plosives
- Protects Mic from Moisture and Dirt
Sennheiser Profile Wireless Replacement Windscreen for Clip-On Transmitter
Auray WLF-018-3 Foam Windscreens for 1/8" Diameter Microphones (3 Pack)
- High-Quality Acoustic Foam
- Reduces Vocal Plosives
- Reduces Wind Noise
- Protects Mic from Moisture and Dirt
Comica Audio CVM-MF1 Furry Wind Muff for Lavalier Microphone (Black)
- Protects Lavalier Mic from Wind Noise
- High-Quality Artificial Fur
- Elastic Opening to Fit Most Lav Mics
Saramonic SR-WS1 Furry Windshield for SmartMic5 Series Microphones
- For SmartMic5 Series Microphones
- Diffuses & Reduces Wind Noise
- Up to 40 dB Max Wind Noise Attenuation
- Long-Haired Exterior
MXL WS002 Windscreen
Learning About Microphone Windscreens & Foam Covers
Microphone windscreens are essential if you want to achieve quality pro audio with your film projects. Sudden gusts of wind can completely overwhelm key dialogue and other important sounds. The wind itself has no sound; instead, the actual sound of wind comes from the movement of air across surfaces. Luckily, there are several available options if you want to safeguard your shotgun mic against the wind.
How Microphone Windscreens & Foam Covers Work
Even if you have the most sophisticated shotgun mics on the market, the sound may be useless if you're shooting outdoors without adequate wind protection. Although there are a few different types of wind protection options available, they all operate under the same basic principles. Wind protection aims to keep the air off the mic capsules. Covering your microphones accomplishes this to some degree, but you may also need additional protection. Lycra and other similar materials can "cut" into the wind, providing even more wind noise cancellation, when coupled with mic covers.
Softies for Mic Wind Protection
Wrap softies directly over your mics for solid protection. Softies feature synthetic fur that helps break up the wind. The longer the fur, the better the wind protection. Softies offer a simple and straightforward solution, and these microphone wind muffs are most suitable with mild breezes that don't turn into strong gusts of wind.
Using Zeppelins
Zeppelins are multi-layered microphone windscreens that fully enclose shotgun mics and protect against the wind. Zeppelins include inner chambers of non-moving air, and often feature outer layers of wind-cutting materials, such as fur. Unlike softies, which touch the surface of the mics, zeppelins leave microphones exposed within a layer of air inside enclosed structure. Also, some zeppelins can help reduce vibrations from handling boompoles and fishpoles. Zeppelins are the most effective and professional solutions for wind protection. They also offer increased versatility, as you can remove the outer layers if need be.
If you need professional microphone windscreens, check out B&H Photo and Video for a wide assortment of options, and other location sound audio equipment.


