Benchmark AHB2 High-Resolution Power Amplifier (Black)
Crown Audio DCi 21250 Two-Channel Analog Power Amplifier (1250W @ 4 ohms)
Crown Audio CDi 4|600 4-Channel DriveCore Series Power Amplifier (600W)
- DriveCore Technology
- Remarkable Performance & Reliability
- Supports HiQnet Audio Architect Software
- Monitor & Control over Standard TCP/IP
Crown Audio DCi DriveCore Install 8-Channel Power Amplifier with Dante Networked Audio (300W)
Pyle Pro PTA1000 Professional Stereo Power Amplifier (250W/Channel @ 8 Ohms)
- Rackmount Design
- Stereo and Bridged Modes
- XLR and 1/4" Inputs
- speakON and Binding Post Outputs
Pyle Pro PTA1000BT Professional Stereo Power Amplifier with Bluetooth (500W/Channel @ 8 Ohms)
- Rackmount Design
- Stereo and Bridged Modes
- XLR, 1/4" & Bluetooth Inputs
- USB Port and SD Card Slot
Key Digital KD-AMP220 2-Channel Compact Digital Amplifier
- 20W per Channel at 4 Ohms
- 40W at 8 Ohms Bridged
- Input for Condenser/Dynamic Mic
- 48V Phantom Power for Condenser Mics
Behringer Europower EPQ304 300W 4-Channel Power Amplifier with ATR Technology
- For Live Stages and Home Audio
- Accelerated Transient Response (ATR)
- 4 x 75W into 4 Ohms, 4 x 50W into 8 Ohms
- Mono, Stereo, or Bridged Modes
Behringer A800 800W Class-D Power Amplifier
- For Stages and Studios
- Ultra-Linear Class-D Power Amplifier
- 2 x 400W into 8 Ohms, 1 x 800W Bridged
- Low Impedance Drives any Passive Speaker
AudioSource AD1002 2-Channel Digital Power Amplifier
- 100W Max Stereo Power Output at 8 Ohms
- 4 Ohms and 8 Ohms Compatible
- Treble, Bass, and Balance Controls
- Stereo RCA Inputs
Behringer NX1000 2-Channel 1000W Amplifier with SmartSense Impedance Compensation
- Two-Channel Amplifier: 2 x 500W
- 2, 4, and 8 Ohms
- Class-D Amplifier
- SmartSense Impedance Compensation
Behringer KM750 750W Stereo Power Amplifier with ATR Technology
- For Live Stages and Venues
- Accelerated Transient Response (ATR)
- 2 x 400W into 4 Ohms, 750W into 8 Ohms
- Stereo or Mono Bridged Operation
Behringer NX3000 2-Channel 3000W Amplifier with SmartSense Impedance Compensation
- Two-Channel Amplifier: 2 x 1500W
- 2, 4, and 8 Ohms
- Class-D Amplifier
- SmartSense Impedance Compensation
Marathon DJ-6000 Stereo Power Amplifier (900W/Channel @ 8 Ohms)
- Rackmount Design
- Stereo, Parallel, and Bridged Modes
- XLR and 1/4" Inputs
- Speakon and Binding Post Outputs
AtlasIED Time Saving Devices TSD-PA122G 12W 2-Channel Power Amplifier (Black)
Behringer NX1000D 1000W 2-Channel Amplifier with DSP and Impedance Compensation
- Two-Channel Amplifier: 2 x 500W
- 2, 4, 8 Ohms
- Class-D Amplifier
- High-Performance DSP Speaker Processor
Behringer NX3000D 3000W 2-Channel Amplifier with DSP and Impedance Compensation
- Two-Channel Amplifier: 2 x 1500W
- 2, 4, 8 Ohms
- Class-D Amplifier
- High-Performance DSP Speaker Processor
Behringer KM1700 1700W Stereo Power Amplifier with ATR Technology
- For Live Stages and Venues
- Accelerated Transient Response (ATR)
- 2 x 800W into 4 Ohms, 1700W into 8 Ohms
- Stereo or Mono Bridged Operation
Pyle Pro PT8000CH 8-Channel Stereo/Mono Amplifier
- Rackmount Design
- 8 Stereo and 4 Bridge Channels
- Independent Level Controls
- Protection Circuitry
ART SLA-2-F 2-Channel Studio Linear Power Amplifier (230V)
- Rackmount Design
- Stereo and Bridged Modes
- XLR, 1/4", and Euroblock Inputs
- Binding Post Outputs
AtlasIED Time Saving Devices TSD-PA252G 25W 2-Channel Power Amplifier (Black)
Auratone A2-30 Amplifier for 2 5C Super Sound Cubes
- Designed for Auratone 5C Speakers
- 2 x 30W at 8 Ohms
- XLR Connections & Speaker Binding Posts
- Streamlined Controls
Behringer Europower EP2000 2000W Stereo Power Amplifier with ATR Technology
- For Live Stages and Venues
- Accelerated Transient Response (ATR)
- 2 x 1000W into 2 Ohms, 2000W into 4 Ohms
- Stereo or Mono Bridged Operation
Behringer NX4-6000 4-Channel 6000W Amplifier with SmartSense Impedance Compensation
- Four-Channel Amplifier: 4 x 1600W
- 2, 4, and 8 Ohms
- Class-D Amplifier
- SmartSense Impedance Compensation
Lab.Gruppen CA2401 240W Commercial Amplifier
- For Commercial & Industrial Applications
- 4/8-Ohm and 70/100V Operation
- Switchable High-Pass Filter
- Energy Star Certified
Behringer Europower EP4000 4000W Stereo Power Amplifier with ATR Technology
- For Live Stages and Venues
- Accelerated Transient Response (ATR)
- 2 x 2000W into 2 Ohms, 4000W into 4 Ohms
- Stereo or Mono Bridged Operation
Ashly FA-125.2 2-Channel Installation Amplifier (1 RU, 1/2 Rack)
- 125W per Channel or 1 x 250W Bridged
- 4/8/16 Ohms, 70/100V
- Class-D Circuitry
- Euroblock Inputs and Outputs
Avantone Pro CLA100 Class-AB 100W 2-Channel Power Amp for Passive Monitors
- 100W into 8 Ohms
- Stereo & Bridged Modes
- 245W into 8 Ohms in Bridged Mode
- XLR Inputs with Link Output per Channel
Learning About Power Amplifiers
Power amplifiers are essential for raising the magnitude of a given input signal to produce the best audio quality. These signals increase to a level that can drive a high amount of audio output to devices such as speakers, RF transmitters, and headphones.
Choosing the Right Amplifier Power
Louder speakers and larger rooms require more power. Both speakers and amps come in a range of power ratings that measure how much power they can churn out. For amps, look out for the RMS power ratings, and for your speakers, check the program power ratings. As a rule of thumb, choose a power amp that can deliver power that's twice the speaker's program power rating. For instance, a live sound guitar speaker with a program power rating of 350 watts requires guitar amplifiers that can produce up to 700 watts of power.
What to Consider in a Power Amp
For crisp and clear audio, getting the right amp for your particular speaker is imperative. Besides the power, look out for a number of other factors.
Channels
You can shop for power sound amplifiers according to the number of channels of your speaker setup. They're available from 1 to 12-channel amps. 8-channel amplifiers are popular with many consumers, as they're optimized for 4 and 8-ohm speakers and come with built-in subwoofer/satellite crossovers that help improve the audio quality.
Headroom
The headroom is the difference between an amplifier's operating level and the maximum level it can pass without any distortion. Since music has wide variations of dynamic range, you'll have frequent power distortion if your amp doesn't have enough headroom. Thus, shop for amplifiers with extra headroom for clean power output. You may also want to go for audio distribution amplifiers to stabilize the signals within the sound system components.
Input/Output Connections
Most stereo power amplifiers come with XLR connectors, but there are multiple connection options available, such as TRS, 1/4-inch, and RCA inputs. Balanced connectors such as XLR cables are more suitable with long cable runs. For shorter cable length applications like home audio, DJ systems, and connections to live sound mixers, RCA connectors are ideal.
Browse B&H Photo and Video's wide variety of rack mount amplifiers and related products, such as headphone amplifiers, to find the right ones for your needs. Choose from a range of amplifier brands, including Bose, QSC, Crown Audio, Pyle Pro, and Yamaha.


