Kupo Multi-Clip
- Stacked Pair of Connected Clips
- Clips Are Easily Rotated into Position
- Length: 4.25"
- Die-Cast Aluminum; Black Powder Finish
Neewer Studio Spring Clamp for Reflector
- Designed for Large Studio Reflector
- Fits Light Stand with 5/8" Top Stud
- Easy to Use
- Sturdy Metal Construction
Neewer ST85 Super Clamp with Dual Ball Head Magic Arm
- Load Capacity: 3.3 lb
- Clamp Mounts on Surface 0.6 to 2.3" Wide
- 3" Dual Ball Head Magic Arm Design
- Multiple 1/4"-20 Mounting Threads
9.SOLUTIONS Python Clamp
- Load Capacity: 44 lb
- Clamping Range: 0 to 1.96"
- Tightening Knob
- 3/8"-16 (M10) Connection
Kupo Convi Clamp (Silver Finish)
- Accepts Select Convi Accessories
- Lightweight Alloy Construction
- Stainless Steel Bolts
- Supports up to 44 lb
Kupo Convi Clamp with Adjustable Handle and Hex Stud (Black)
- 44 lb Load Capacity
- 5/8" Hex Stud
- Repositionable Handle
- Saddle for Flat Surfaces
Altman Malleable Iron Pipe Clamp
9.SOLUTIONS Python Clamp with Grip Joint
- Load Capacity: 44 lb
- Clamping Range: 0 to 1.97"
- Tightening Knob
- Grip Joint with 3/8" & 5/8" Receptacles
Kupo Toothy Convi Clamp
- Features Teeth for Gripping Trees
- Fits Tubes with 2" Diameter
- High-Tensile Aluminum Construction
CineGearFactory Micro End Vice Jaw Clamp (2.4")
- Aluminum Construction
- Clamping Range: 0.6 - 2.4"
- 3/8" with 1/4"-20 Screw Male Pin
Manfrotto 035BN Super Clamp without Stud for Binoculars
Leofoto MC-40 Multipurpose Clamp
- Anti-Twist Groove
- 1/4"-20 & 3/8"-16 Mounting Threads
- Compact and Durable
- 6.6 lb Max Load
Kupo Half-Coupler with 28mm Spigot
- Load Capacity: 440 lb, Fits 48-51mm Tube
- 1 1/8" Spigot, High-Tensile Aluminum
9.SOLUTIONS Python Double Clamp
Frio Grasp Mini Multipurpose Clamp Cold Shoe Setup
- Jaw Opening: up to 1.3"
- Locking nut for precise alignment
- 1/4"-20 and 3/8"-16 screw threads
- Soft Tip Screw
Kupo Adjustable Gaffer Grip
- Quick-Mount, Multi-Purpose Clamp
- Grabs Most Surfaces Flat or Round
- 0.98 - 2.56" Clamping Range
- Steel Construction with Black Finish
Kupo 3-Way Clamp for 1.0-1.4" Tube
- Mounts Around Tubing Sized 1.0-1.4"
- Three Recessed Mounting Points
- Aluminum Construction
- Supports Loads up to 66 lb (30 kg)
Kupo Super Knuckle Claw
Manfrotto Virtual Reality Super Clamp
- Supports Virtual Reality Cameras
- Load Capacity: 33.1 lb
- Clamp Width: 0.5 to 2.2"
- Clamps to Pipes, Rails, and Trees
Kupo TV Coupler (Silver)
- 1 1/8" Receiver Load Capacity: 661.4 lb
- 5/8" Pin Load Capacity: 88 lb
- 1 1/8" Receiver; 5/8" Stud/Receiver
- Fits 48 to 51mm Tube Diameters
Kupo 4" Super Viser Clamp for up to 2" Surfaces
- Works with Convi Clamp Accessory
- Special Groove Keeps Jaws Aligned
- Die-Cast Aluminum Construction
- Knurled Neck for Maximum Friction
Kupo 9" Super Viser Clamp for up to 6" Surfaces
- Works with Convi Clamp Accessory
- Special Groove Keeps Jaws Aligned
- Die-Cast Aluminum Construction
- Knurled Neck for Maximum Friction
Kupo 10" Chain Clamp
- Wraps Around Odd-Shaped Objects
- Two 5/8" Baby Pins
- Heat-Treated Alloy Steel Construction
- Locking Release Lever Set-Screw Knob
DigitalFoto Solution Limited Pelican Gaffer Grip
- Multipurpose Clamp
- Grips Most Flat or Round Surfaces
- 5/8" Pin, 42/64" Stud
- Variable-Tension Control Knob
Avenger C1550 Heavy Duty Super Clamp
Cardellini Skinny-Mini Cardellini Clamp (Black)
- Jaw Capacity: 1.5"
- Jaw Width: 15/16"
- Shaft Length: 5-3/8"
- Shaft Includes 1/4"-20 Mounting Thread
Kupo Duck Bill Clamp
- For Holding Bead Board, Foamcore, Etc.
- Clamps Onto Flat Surfaces Like Tabletops
- 5/8" Baby Pin
- Adjustable Vice Grip
Learning About Photography Clips and Clamps
Clips and clamps for photography equipment can vary in design and purpose depending on what you need to hold. Heavy-duty clamps are meant to hold heavier items such as large lights, softboxes, video recorders, and cameras. Some clips hold lightweight objects such as paper or fabric backgrounds, cords, and small props. Various clamp styles are also available for holding audio/video equipment like microphones, camcorders, speakers, boom arms, and more.
Types of Lighting Clamps
Small clamps, such as A-clamps, are suitable for holding lightweight photo and lighting accessories, like muslin, vinyl, and other fabric backgrounds. Mountable options like super clamps can attach to extension arms and poles for holding heavier equipment. Other clamps that are useful in photography and videography include:
- Cardellini: Meant for tight fit areas and general use
- Platypus: Made for C-stands, and holds boards and reflectors
- C: Holds heavier general equipment such as lights and cameras
Choosing photo lighting accessories that complement your existing equipment helps increase your range as a photographer. If you're an amateur photographer or videographer, purchasing kits can help get you everything you need without extensive searching.
Picture Clips and Other Accessories
There are several picture clips and accessories available to help you create a flexible equipment setup for your studio. Expand the reach and capabilities of your studio lighting with studs, receptors, and pins for lighting equipment, such as stabilizing extension poles in wall mounts. Use small photo clips to hold up pictures to dry after processing, or as accessories for hanging your photos on the wall.
B&H Photo and Video carries photo and video lighting and background kits, with clamps and clips included. Browse mounts, adapters, tripods, grip heads, and individual clips and clamps that'll help you get the perfect shot from any angle.


