Ask Our Experts800-606-6969
Hello, Log InAccount & Orders
In-Line Mic Accessories
181 Items
Filter by:
Sort by:
View:
Type
Polsen XLR-USB-48 XLR to USB Audio Interface
BH # POXLRUSB48 MFR # XLR-USB-48
Key Features
- Connects XLR Mic to USB
- Selectable 48V Phantom Power
- Plug and Play with No Drivers Needed
- 3.5mm Headphone Out with Level Control
Pearstone IMA-1030 Switchable In-Line Attenuator
BH # PEIMA1030 MFR # IMA-1030
Key Features
- -10, -20, or -30 dB of Attenuation
- XLR Female to XLR Male
- Fully Shielded Metal Case
Top Seller
RODE VXLR Pro Transformer-Balanced 3.5mm TRS Female to XLR Male Adapter with Phantom-Power Converter
BH # ROVXLRPRO MFR # VXLR PRO
Key Features
- Connects 3.5mm Source to XLR Input
- For Lav/Headset/Shotgun Mics & Wireless
- Converts Phantom Power to Plug-In Power
- Locking 3.5mm TRS Female to XLR Male
Kopul VOL-MATE-R Inline Stereo RCA Volume Control
BH # KOVOLMATER MFR # VOL-MATE-R
Key Features
- Stereo Volume Control for Home & Studio
- 2 RCA Female Input and Output Connectors
- Stepless Volume-Attenuation Knob
- Passive Design, No Power Required
Available in other Styles, Configurations & Kits
Top Seller
RODE VXLR+ 3.5mm TRS Female to XLR Male Adapter with Phantom Power Converter
BH # ROVXLRP MFR # VXLR+
Key Features
- Connects 3.5mm Source to XLR Input
- For Lav/Headset/Shotgun Mics & Wireless
- Converts Phantom Power to Plug-In Power
- Locking 3.5mm TRS Female to XLR Male
Available in other Styles, Configurations & Kits
Cloud Microphones Cloudlifter CL-1 Mic Activator
BH # CLCL1 MFR # CL-1
Key Features
- 1 Mic Input
- Improves Signal-to-Noise Ratio
- Use with Passive Dynamic and Ribbon Mics
- +25 dB of Clean, Transparent Gain
Available in other Styles, Configurations & Kits
Switchcraft AudioStix Stereo 3.5mm Female to Balanced Mono XLR Male Adapter
BH # SW318 MFR # 318
Key Features
- Stereo 3.5mm to Balanced Mono XLR Male
- Mic-Level Output
- Volume Control
- Ground Lift Switch
Shure MVX2U Gen 2 XLR to USB-C Audio Interface
BH # SHMVX2UG2 MFR # MVX2UG2
Key Features
- Studio-Quality XLR to USB-C Interface
- Up to +60 dB of Clean Gain
- 48V Phantom Power for Condensers
- Onboard Shure DSP with Zero Latency
TRITON AUDIO FetHead In-Line Microphone Preamp for Ribbon and Dynamic Mics
BH # TRFETHEAD MFR # FETHEAD
Key Features
- Low-Noise Class-A JEFT Amplifier
- Double Single-Ended Amplifier Topology
- Shielded Enclosure
- 4 Matched JFETs
Available in other Styles, Configurations & Kits
Shure A15AS In-Line Switchable Attenuator/Pad XLR Barrel
BH # SHA15AS MFR # A15AS
Key Features
- Reduces Level by 15, 20, or 25 dB
- Female 3-Pin XLR In, Male 3-Pin XLR Out
- Works with Balanced Mic or Line Level
Xvive Audio P1 Portable Phantom Power Supply with Rechargeable Battery
BH # XVP1 MFR # P1
Key Features
- Full 12 or 48V of Phantom Power
- Low Noise
- Built-In Li-Ion Rechargeable Battery
- Battery Life Up to 40 Hours
Switchcraft 318BT Phantom-Powered Bluetooth Audio Receiver
BH # SW318BT MFR # 318BT
Key Features
- 4.0 Bluetooth
- 50 to 100' Working Distance
- 48V Phantom Power
- Low Latency
Polsen XP-2 2-Channel Signal Booster
BH # POXP2 MFR # XP-2
Key Features
- 25 dB of Clean Gain for Low-Output Mics
- Ideal for Passive Dynamic & Ribbon Mics
- Runs on Simple 48V Phantom Power
- Strong Signal without Noise or Coloring
Available in other Styles, Configurations & Kits
Cloud Microphones Cloudlifter CL-2 Mic Activator
BH # CLCL2 MFR # CL-2
Key Features
- 2 Mic Inputs
- Improves Signal-to-Noise Ratio
- Use with Passive Dynamic and Ribbon Mics
- +25 dB of Clean, Transparent Gain
Available in other Styles, Configurations & Kits
Sescom XLR Male to XLR Female In-Line Attenuator (-10 dB)
BH # SESIL10DB MFR # SES-IL-10DB
Key Features
- -10 dB of Attenuation
- 3-Pin XLR-Male to XLR-Female Design
- Prevents Overloading Signal
- No Distortion or Tonal Coloration
Available in other Styles, Configurations & Kits
Hosa Technology In-Line XLR Barrel Microphone On/Off Switch
BH # HOMOOS MFR # GMS-274
Whirlwind Lifter In-Line XLR Barrel Ground Lifter
BH # WHL MFR # LIFTER
Key Features
- Good for Troubleshooting Ground Problems
- Female-to-Male XLR 3-Pin
- Isolates Ground of Balanced Audio Signal
- Saves You from Cutting Cable Shield Wire
Klark Teknik Mic Booster CM-2 Dual-Channel Dynamic Microphone Booster
BH # KLMICBSTRCM2 MFR # 0838-AAU86-001
Key Features
- Adds Gain to Microphone Signal
- Preamps Provide +25 dB of Gain
- Use with Dynamic or Passive Ribbon Mics
- Requires 48V Phantom Power
Kopul XIT-600 XLR Single-Channel Passive XLR Isolation Transformer
BH # KOXIT600 MFR # XIT-600
Key Features
- For Mics, Mixers, Computers, Speakers
- Transformer Eliminates Ground-Loop Hum
- Passive Design, No Power Required
- XLR Balanced/Unbalanced Mic/Line Input
Whirlwind ISOXL Line-Level Isolation Transformer
BH # WHISOXL MFR # ISOXL
Sescom 6-Position Variable Attenuator
BH # SEMULTIPAD MFR # SES-MULTI-PAD
Key Features
- Attenuate without Introducing Noise
- Select -5, -10, -20, -30, -40, or -50 dB
- Balanced Connections
TRITON AUDIO FetHead Phantom In-Line Microphone Preamp
BH # TRFETHDPHNTM MFR # FETHEAD PHANTOM
Key Features
- For Condenser Microphones
- Low-Noise Class-A JFet Amplifier
- 18 dB Amplification
- Double Single-Ended Amplifier Topology
Available in other Styles, Configurations & Kits
Rolls DB226 Stereo Line to Balanced Mono Converter
BH # RODB226 MFR # DB226
Key Features
- RCA Input or Output
- Balanced Pluggable Screw Terminal
- Small Compact Design
- 40 Hz to 20 kHz Frequency Response
Kopul VOL-MATE-X Inline Single-Channel XLR Volume Control
BH # KOVOLMATEX MFR # VOL-MATE-X
Key Features
- Volume Control for Studio and Live Sound
- XLR Input and Output Connectors
- Stepless Volume-Attenuation Knob
- Passive Design, No Power Required
Available in other Styles, Configurations & Kits